Buy 59-7425 Meter Arbitrary Sca part by General Resistance Inc

Part Number:  59-7425
Alternate P/N:  597425
Manufacturer:  general resistance inc
NIIN:  000609989
Item Name :  meter arbitrary sca
CAGE Code:  05591
INC Code:  16476
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 59-7425 (described as Meter Arbitrary Sca), manufactured by General Resistance Inc with CAGE code 05591. This part is registered under NSN 6625-00-060-9989, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-060-9989, NCB code 00 (origin: USA), and INC 16476. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 59-7425 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 59-7425

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 59-7425, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-060-9989, 6625000609989

MRCCriteriaCharacteristic
ASSSPointer ColorWHITE SINGLE INDICATOR SINGLE RANGE
FEATSpecial FeaturesRUGGEDIZED
AMQYInstallation DesignPANEL
NHCFNuclear Hardness Critical FeatureNONHARDENED
ASTWScale Marking0; 10; 20; 30; 40; 50
ABKWOverall Height1.750 INCHES NOMINAL
APSTMeter Depth Behind Mounting Flange1.000 INCHES NOMINAL
ABMKOverall Width1.750 INCHES NOMINAL
ABHPOverall Length1.562 INCHES NOMINAL
CTTDCircuit Attachment Method And Quantity2 SOLDER LUG AND 2 THREADED STUD
CBBLFeatures ProvidedMAGNETIC SHIELD AND ZERO ADJUSTER
AQFYBackground ColorBLACK SINGLE INDICATOR SINGLE RANGE
AQECMovement TypeMOVING COIL, PERMANENT MAGNET
AKYNFurnished Items And QuantityNUT 6; LOCKWASHER 6; SHUNT WIRE 1
ABKRCenter To Center Distance Between Mounting Facilities Parallel To Width1.312 INCHES NOMINAL
AXHRMounting Facility Type And Quantity4 SCREW AND 4 UNTHREADED HOLE
SFTTSurface TreatmentENAMEL SEMIGLOSS
MARKSpecial MarkingsON BACK,SEALED DO NOT OPEN; ORANGE LINE AT 17.5 AND 32.5; GREEN BAR FROM 22.5 TO 27.5
ANTGSensitivity Rating50.0 MILLIVOLTS
MRCDecoded RequirementClear Text Reply
BHDCScale Graduation TypeLINEAR SINGLE INDICATOR SINGLE RANGE
ABWGScale Division Quantity5 SINGLE INDICATOR SINGLE RANGE
ANRLMounting Arrangement StyleFOUR HOLE/STUD RECTANGULAR/SQUARE
ADZCEnvironmental ProtectionAIRTIGHT AND DUST RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT
APMMDial Scale Marking ColorWHITE SINGLE INDICATOR SINGLE RANGE
ZZZVFsc Application DataTEST SET,ELECT. EQUIP.
STYLStyle DesignatorRECTANGULAR FLUSH MTG
AACTCircuit Current For Which DesignedDC
APSWMeter Body Diameter Behind Mounting Flange1.468 INCHES NOMINAL
AMKDIndicator TypeDIAL W/POINTER
CTQLMovement Suspension MethodJEWEL PIVOT BASE
ABKQCenter To Center Distance Between Mounting Facilities Parallel To Length1.312 INCHES NOMINAL
AAPBDielectric Withstanding Voltage In Volts1500
ABTBMounting Hole Diameter0.125 INCHES NOMINAL
APPNAccuracy In Percent-3.0 TO 3.0 AT FULL SCALE SINGLE INDICATOR SINGLE RANGE
MATTMaterialSTEEL

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 136740 - Meters elec/parts
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 657 - Instruments, electric meter

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top