Buy 96S 2222 Pin Shoulder Headle part by Gilbert Engineering Co Inc

Part Number: 96S 2222

Manufacturer: gilbert engineering co inc

NSN: 5315-01-121-6710

NIIN: 011216710

Item Name : pin shoulder headle

CAGE Code: 03877

INC Code: 16749

Country: USA

NCB Code: 01

We've received your request for 96S 2222 (described as Pin Shoulder Headle), manufactured by Gilbert Engineering Co Inc with CAGE code 03877. This part is registered under NSN 5315-01-121-6710, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-121-6710, NCB code 01 (origin: USA), and INC 16749. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 96S 2222 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 96S 2222

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 96S 2222, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 96S 2222 with NSN 5315-01-121-6710, 5315011216710

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-01-121-6710 Item PartTypeName: PIN,SHOULDER,HEADLESS	5315	011216710	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
200080-001	6	9	5

Characteristics Data of NSN 5315-01-121-6710, 5315011216710

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	CHAMFERED
AAHP	SECOND END STYLE	RADIUS
AATR	SHANK LENGTH	0.157 INCHES NOMINAL
AAVH	SHOULDER DIAMETER	0.071 INCHES MINIMUM AND 0.075 INCHES MAXIMUM
AAZE	SHANK DIAMETER	0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
ABHP	OVERALL LENGTH	0.410 INCHES NOMINAL
ALWS	SECOND END CORNER RADIUS	0.005 INCHES NOMINAL
AMCS	FIRST END TAPER LENGTH	0.022 INCHES NOMINAL
CQBB	SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
CQTR	SECOND SHANK DIAMETER	0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
CRDY	FIRST END LOCATION	SHORT SHANK END
CRMG	FIRST END TAPER ANGLE	15.0 DEGREES NOMINAL
CWAS	SECOND SHANK LENGTH	0.223 INCHES MINIMUM AND 0.237 INCHES MAXIMUM
MATT	MATERIAL	STEEL OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTMA582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STYL	STYLE DESIGNATOR	SHOULDER

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Sf9gf-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	P - 77.5
LTL:	W - Rating variable
NMFC:	061700 - Elec appliances/instruments noi
SHC:	Z - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small