Buy 10068552 Shaft Axle Automoti part by Gkn Aerospace Inc

Part Number: 10068552

Manufacturer: gkn aerospace inc

NSN: 2520-01-474-3901

NIIN: 014743901

Item Name : shaft axle automoti

CAGE Code: 62826

FSC: 2520 Vehicular Power Transmission Components

INC Code: 10852

Country: USA

NCB Code: 01

FSG: 25 Vehicular Equipment Components

We've received your request for 10068552 (described as Shaft Axle Automoti), manufactured by Gkn Aerospace Inc with CAGE code 62826. This part is registered under NSN 2520-01-474-3901, classified in FSG 25 Vehicular Equipment Components / FSC 2520 Vehicular Power Transmission Components. Our verification process will confirm traceability through supporting identifiers including NIIN 01-474-3901, NCB code 01 (origin: USA), and INC 10852. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 10068552 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 10068552

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 10068552, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 10068552 with NSN 2520-01-474-3901, 2520014743901

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
2520-01-474-3901 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE	2520	014743901	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10068552	5	2	3

Characteristics Data of NSN 2520-01-474-3901, 2520014743901

MRC	Criteria	Characteristic
BNYT	FLANGE THICKNESS AT MOUNTING HOLE	0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	6 UNTHREADED HOLE
AHTC	FLANGE OUTSIDE DIAMETER	2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM
BNYS	FLANGE OVERALL THICKNESS	0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM
FEAT	SPECIAL FEATURES	ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167
AGAV	END ITEM IDENTIFICATION	NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V
AMGA	SECOND END SPLINE LENGTH	3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM
AMGC	SECOND END SPLINE MAJOR DIAMETER	1.375 INCHES NOMINAL
AMQF	SECOND END TYPE	SPLINED
BNTM	SECOND END SPLINE TYPE	INVOLUTE
AAUB	HOLE DIAMETER	0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
ABHP	OVERALL LENGTH	29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM
AMDM	FIRST END SPLINE LENGTH	3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM
AMGB	SECOND END SPLINE MINOR DIAMETER	1.282 INCHES NOMINAL
AMGF	SECOND END PITCH DIAMETER	0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
AMHF	ERR DEFAULT	ERR DEFAULT
AMHF	SECOND END GEAR OUTSIDE DIAMETER	1.375 INCHES NOMINAL
AMQA	FIRST END TYPE	FLANGED
BNTH	ERR DEFAULT	ERR DEFAULT
BNTH	SECOND END GEAR TEETH QUANTITY	32
BNTJ	ERR DEFAULT	ERR DEFAULT
BNTJ	SECOND END GEAR TEETH PRESSURE ANGLE IN DEG	45.0
BNTN	SECOND END SPLINE PRESSURE ANGLE IN DEG	45.0

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8483909500 (NAICS 333613)	Parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts
SITC : 74890	Parts, n.E.S., for transmission shafts and cranks, bearing housings, gears, gearing, ball screws, gear boxes, flywheels and pulleys, clutches, etc.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	J2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	M - 85.0
NMFC:	146260 - Guns noi mntd/not mntd/gun barrels
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	586 - Vehicle parts, other than automobile