Buy 91A1AB28B15L Resistor Variable N part by Glastron Boat Co

Part Number:  91A1AB28B15L
Manufacturer:  glastron boat co
NIIN:  012953321
Item Name :  resistor variable n
CAGE Code:  32297
INC Code:  37405
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 91A1AB28B15L (described as Resistor Variable N), manufactured by Glastron Boat Co with CAGE code 32297. This part is registered under NSN 5905-01-295-3321, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 01-295-3321, NCB code 01 (origin: USA), and INC 37405. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 91A1AB28B15L requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 91A1AB28B15L

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 91A1AB28B15L, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 91A1AB28B15L with NSN 5905-01-295-3321, 5905012953321

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-295-3321

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050129533210NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
91A1AB28B15293

Characteristics Data of NSN 5905-01-295-3321, 5905012953321

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLERECTANGULAR BUSHING MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABXFSHAFT LENGTH0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
ADAPMOUNTING BUSHING LENGTH0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
ADATBODY WIDTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
ADAUBODY HEIGHT0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
AEFDACTUATOR TYPESINGLE SHAFT
AEFLMAXIMUM RUNNING TORQUE1.50 INCH-OUNCES
AFJNFRAGILITY FACTORMODERATELY RUGGED
AJYPSCREW THREAD SERIES DESIGNATORUNEF
AJYQSCREW THREAD QUANTITY PER INCH32.0
AXGYMOUNTING METHODSTANDARD BUSHING
CBBLFEATURES PROVIDEDHUMIDITY PROOF
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG295.0 MINIMUM AND 305.0 MAXIMUM
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
CXHNSHAFT BEARING TYPESLEEVE
TTQYTERMINAL TYPE AND QUANTITY3 PIN
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
ABJTTERMINAL LENGTH0.580 INCHES MINIMUM AND 0.624 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
ADAQBODY LENGTH0.883 INCHES MINIMUM AND 0.917 INCHES MAXIMUM
AEDXSHAFT STYLEROUND,SLOTTED
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION235.0 MINIMUM AND 245.0 MAXIMUM
AEFKMAXIMUM STARTING TORQUE1.50 INCH-OUNCES
AEFMMAXIMUM STOP TORQUE64.00 INCH-OUNCES
AEHTCENTER TO CENTER DISTANCE BETWEEN TERMINALS0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
AJYNSCREW THREAD DIAMETER0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
CBMECUBIC MEASURE0.376 CUBIC INCHES
CQCCELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
CQCMCENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CQTMTERMINAL LOCATIONLOWER ADJACENT SIDE SINGLE ROW

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top