We've received your request for 29A731 (described as Gearcase Motor), manufactured by Globe Motors Inc with CAGE code 25140. This part is registered under NSN 3010-00-985-7963, classified in FSG 30 Mechanical Power Transmission Equipment / FSC 3010 Torque Converters and Speed Changers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-985-7963, NCB code 00 (origin: USA), and INC 01102. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 29A731 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-985-7963 Item PartTypeName: GEARCASE-MOTOR | 3010 | 009857963 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 29A731 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 1.250 INCHES |
| AAJU | OVERALL LENGTH | 4.909 INCHES |
| AAJV | OVERALL WIDTH | 1.250 INCHES |
| ABWV | SHAFT DIAMETER | 0.1875 INCHES NOMINAL SINGLE END |
| ACDC | CURRENT TYPE | DC INPUT |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | 10000.0 FEET |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | TOTALLY INCLOSED |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| AXGY | MOUNTING METHOD | FLANGE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| BFLT | TIME INTERVAL | 5.0 SECONDS MINIMUM OFF AND 9.9 MINUTES MAXIMUM ON |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | 10.0 INCH-OUNCES RUNNING |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 1.437 INCHES SINGLE END |
| CWDY | TEMP RATING | -40.0 OPERATING DEG CELSIUS AND 85.0 OPERATING DEG CELSIUS |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 1.414 INCHES |
| CWGL | CURRENT RATING IN AMPS | 0.750 SINGLE OUTPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 24.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 790.000 LOW REVOLUTIONS PER MINUTE AND 970.000 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| FEAT | SPECIAL FEATURES | WITH INTEGRAL SPEED REDUCTION 18.78 TO 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8483905000 (NAICS 333612) | Parts of gearing, gear boxes and other speed changers |
| SITC : 74890 | Parts, n.E.S., for transmission shafts and cranks, bearing housings, gears, gearing, ball screws, gear boxes, flywheels and pulleys, clutches, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | J2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | M - 85.0 |
| NMFC: | 121830 - Gear casings iron |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 593 - Motors and parts, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
