Buy 71C30-03-01-5-S-01-1-02S Switch Rotary part by Grayhill Inc

Part Number:  71C30-03-01-5-S-01-1-02S
Alternate P/N:  71C3003015S01102S
Manufacturer:  grayhill inc
NIIN:  011047435
Item Name :  switch rotary
CAGE Code:  81073
FSC:  5930 Switches
INC Code:  02134
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 71C30-03-01-5-S-01-1-02S (described as Switch Rotary), manufactured by Grayhill Inc with CAGE code 81073. This part is registered under NSN 5930-01-104-7435, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 01-104-7435, NCB code 01 (origin: USA), and INC 02134. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 71C30-03-01-5-S-01-1-02S requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 71C30-03-01-5-S-01-1-02S

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 71C30-03-01-5-S-01-1-02S, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 71C30-03-01-5-S-01-1-02S with NSN 5930-01-104-7435, 5930011047435

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-104-7435

Item PartTypeName:

SWITCH,ROTARY

59300110474350P
CIICHCCESDPMICCriticalityENAC
U C0
Part NumberISCRNVCRNCCHCCMSDSSADC
71C30-03-01-5-S-01-1-02S293

Characteristics Data of NSN 5930-01-104-7435, 5930011047435

MRCCriteriaCharacteristic
AAJDTHREAD CLASS2A SINGLE MOUNTING FACILITY
AASATHREAD LENGTH0.312 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABFEHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONEXPLOSION PROOF
ABHPOVERALL LENGTH3.193 INCHES NOMINAL
ABNBFIRST FLAT LENGTH0.250 INCHES NOMINAL 1ST ACTUATOR
ABNBFIRST FLAT LENGTH0.250 INCHES NOMINAL 2ND ACTUATOR
ABNCFLAT HEIGHT0.094 INCHES NOMINAL 2ND ACTUATOR
ABNCFLAT HEIGHT0.219 INCHES NOMINAL 1ST ACTUATOR
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL 2ND ACTUATOR
ABWVSHAFT DIAMETER0.250 INCHES NOMINAL 1ST ACTUATOR
ABXFSHAFT LENGTH0.375 INCHES NOMINAL 1ST ACTUATOR
ABXFSHAFT LENGTH0.750 INCHES NOMINAL 2ND ACTUATOR
ADAVOVERALL DIAMETER0.750 INCHES NOMINAL
AFBHINDIVIDUAL SECTION QUANTITY4
AFDCNONTURN DEVICE TYPESLOTTED BUSHING AT 3:00 OCLOCK
AFGAOPERATING TEMP RANGE-65.0 TO 125.0 DEG CELSIUS
AJZESWITCH CONTACT BASIC DESIGNNONPILE-UP SYMMETRICAL
AKPXPOLE QUANTITY1 EACH SECTION FRONT
AKPYTHROW QUANTITY2 4TH SECTION REAR
AKPYTHROW QUANTITY5 1ST SECTION REAR
AKPYTHROW QUANTITY5 2ND SECTION REAR
AKPYTHROW QUANTITY5 3RD SECTION REAR
AXGYMOUNTING METHODTHREADED BUSHING SINGLE MOUNTING FACILITY
CQJXNOMINAL THREAD SIZE0.375 INCHES SINGLE MOUNTING FACILITY
CQMKCONTACT VOLTAGE RATING IN VOLTS115.0 AC AT SEA LEVEL
CQMKCONTACT VOLTAGE RATING IN VOLTS30.0 DC AT SEA LEVEL
CQRQSHAFT FLAT/SLOT ANGULAR LOCATION195.0 DEGREES FROM NONTURN DEVICE ALL ACTUATORS
CQTHROTOR THROUGH CONNECTION QUANTITY1 EACH SECTION
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY2 2ND ACTUATOR
CRJHSWITCH ACTUATOR INDEXING POSITION QUANTITY5 1ST ACTUATOR
CRSJSHAFT TYPEROUND,FLATTED 2ND ACTUATOR
CRSJSHAFT TYPEROUND,HOLLOWED,FLATTED 1ST ACTUATOR
CSCFTERMINAL TYPETAB,SOLDER LUG
CSHWCONTACT SWITCHING ACTIONMAKES BEFORE BREAKS EACH SECTION REAR
CSLCSWITCH ACTUATOR POSITIONING INCREMENT30.0 DEGREES ALL ACTUATORS
CSMWDETENT ROTATIONAL TORQUE RANGE4.000 TO 32.000 INCH-OUNCES ALL ACTUATORS
CTDNSWITCH ACTUATOR STOP DEVICE TYPEFIXED STOP ALL ACTUATORS
CTHFCONTACT LOAD CURRENT RATING300.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
CTHFCONTACT LOAD CURRENT RATING300.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
PMLCPRECIOUS MATERIAL AND LOCATIONCONTACTS AND TERMINAL SURFACES GOLD AND ROTOR CONTACT SILVER
PRMTPRECIOUS MATERIALGOLD AND SILVER
STYLSTYLE DESIGNATORTAP,CIRCULAR,BUSHING MOUNT
THSDTHREAD SERIES DESIGNATORUNEF SINGLE MOUNTING FACILITY

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509025 (NAICS 335931) Switches, rotary, rated at over 5 a, for a voltage not exceeding 1, 000 volts
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC C - Item contains combination of two or more precious metals (silver, gold, platinum).

NSN Management Codes

AAC Y
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top