Buy 53G73220-6003 Stud Shouldered And part by Grindley Manufacturing Inc

Part Number: 53G73220-6003

Alternate P/N: 53G732206003

Manufacturer: grindley manufacturing inc

NSN: 5307-00-422-5130

NIIN: 004225130

Item Name : stud shouldered and

CAGE Code: 32762

FSC: 5307 Studs

INC Code: 15944

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 53G73220-6003 (described as Stud Shouldered And), manufactured by Grindley Manufacturing Inc with CAGE code 32762. This part is registered under NSN 5307-00-422-5130, classified in FSG 53 Hardware and Abrasives / FSC 5307 Studs. Our verification process will confirm traceability through supporting identifiers including NIIN 00-422-5130, NCB code 00 (origin: USA), and INC 15944. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 53G73220-6003 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 53G73220-6003

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 53G73220-6003, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 53G73220-6003 with NSN 5307-00-422-5130, 5307004225130

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5307-00-422-5130 Item PartTypeName: STUD,SHOULDERED AND STEPPED	5307	004225130	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
53-73220-7	2	9	5

Characteristics Data of NSN 5307-00-422-5130, 5307004225130

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A NUT THREAD
AAJD	THREAD CLASS	3A STUD THREAD
AAJF	THREAD DIRECTION	RIGHT-HAND NUT THREAD
AAJF	THREAD DIRECTION	RIGHT-HAND STUD THREAD
AASA	THREAD LENGTH	0.827 INCHES NOMINAL NUT THREAD
AASA	THREAD LENGTH	2.109 INCHES NOMINAL STUD THREAD
AAVH	SHOULDER DIAMETER	2.000 INCHES NOMINAL
AAVK	SHOULDER LENGTH	0.100 INCHES NOMINAL
ABHP	OVERALL LENGTH	6.870 INCHES NOMINAL
ADDB	NUT END SHANK LENGTH	0.173 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	14 NUT THREAD
CMLP	THREAD QUANTITY PER INCH	14 STUD THREAD
CQJX	NOMINAL THREAD SIZE	0.875 INCHES NUT THREAD
CQJX	NOMINAL THREAD SIZE	1.000 INCHES STUD THREAD
CSJZ	STUD END SHANK LENGTH	1.470 INCHES NOMINAL
CSXH	STUD END SHANK DIAMETER	1.140 INCHES NOMINAL
CSYM	SURFACE FINISH	63.0 MICROINCHES UNDERCUTS
CTDT	NUT END SHANK DIAMETER	0.758 INCHES MINIMUM AND 0.768 INCHES MAXIMUM
FEAT	SPECIAL FEATURES	HEAT TREATED 230,000 NOMINAL,SHANK OF STUD END IS STEPPED WITH SECOND DIAMETER OF 1.140 IN. AND TOTAL SHANK LENGTH OF 3.526 IN.
MATT	MATERIAL	STEEL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6427 ASSN STD SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	CADMIUM OVERALL
STYL	STYLE DESIGNATOR	SHOULDERED AND STEPPED
THSD	THREAD SERIES DESIGNATOR	UNF NUT THREAD
THSD	THREAD SERIES DESIGNATOR	UNS STUD THREAD

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Sf9bf-n
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)