We've received your request for 60-6681-2 (described as Nut Plain Round), manufactured by Hdi Landing Gear Usa Inc with CAGE code 5ZBP4. This part is registered under NSN 5310-01-020-6440, classified in FSG 53 Hardware and Abrasives / FSC 5310 Nuts and Washers. Our verification process will confirm traceability through supporting identifiers including NIIN 01-020-6440, NCB code 01 (origin: USA), and INC 15887. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 60-6681-2 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-020-6440 Item PartTypeName: NUT,PLAIN,ROUND | 5310 | 010206440 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 60-6681-2 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPH | SMALL END DIAMETER | 4.973 INCHES NOMINAL |
| ABQU | DRIVE POINT DEPTH | 0.750 INCHES NOMINAL |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 5.500 INCHES NOMINAL |
| ADBG | NUT THICKNESS | 1.100 INCHES NOMINAL |
| ADBH | DRIVE POINT WIDTH | 0.310 INCHES NOMINAL |
| ADBJ | UNDERCUT THICKNESS | 0.920 INCHES NOMINAL |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AGAV | END ITEM IDENTIFICATION | ITEM IS LANDING GEAR SPECIFIC |
| AGGP | DRILLED HOLE DIAMETER | 0.295 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 6 DRILLED |
| BZRR | THREAD SERIES | UN |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQJX | NOMINAL THREAD SIZE | 4.750 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION F |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| FEAT | SPECIAL FEATURES | USED ON THE E3A UPPER OLEO ASSY NLG |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 7318160000 (NAICS 332722) | Nuts of iron or steel |
| SITC : 69421 | Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel |
| CRITL | The item is an aviation critical safety item/flight safety critical aircraft part (acsi/fscap). |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9le-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | U - 50.0 |
| LTL: | U - 50.0 |
| NMFC: | 194160 - Washer or gaskets, iron or steel, |
| SHC: | Z - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 573 - Bolts or nuts (iron or steel),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
