Buy 4005492 Pin Grooved Headed part by Hersey Measurement Co

Part Number: 4005492

Manufacturer: hersey measurement co

NSN: 5315-01-050-1645

NIIN: 010501645

Item Name : pin grooved headed

CAGE Code: 09550

FSC: 5315 Nails Keys and Pins

INC Code: 02382

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 4005492 (described as Pin Grooved Headed), manufactured by Hersey Measurement Co with CAGE code 09550. This part is registered under NSN 5315-01-050-1645, classified in FSG 53 Hardware and Abrasives / FSC 5315 Nails Keys and Pins. Our verification process will confirm traceability through supporting identifiers including NIIN 01-050-1645, NCB code 01 (origin: USA), and INC 02382. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4005492 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4005492

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 4005492, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 4005492 with NSN 5315-01-050-1645, 5315010501645

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-01-050-1645 Item PartTypeName: PIN,GROOVED,HEADED	5315	010501645	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4005492	5	2	3

Characteristics Data of NSN 5315-01-050-1645, 5315010501645

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	SQUARE
AASK	HEAD STYLE	BEVEL
ABMZ	DIAMETER	0.744 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.571 INCHES MINIMUM AND 0.573 INCHES MAXIMUM
ABPB	UNDER HEAD LENGTH	0.475 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM
CRRG	PIN HEAD DIAMETER	0.744 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
CSYM	SURFACE FINISH	0.063 MICROINCHES OUTSIDE DIAMETER
CSYM	SURFACE FINISH	0.063 MICROINCHES UNDERCUT
FEAT	SPECIAL FEATURES	0.164-32 TAP THRU ONE HALF OR SHANK; SHANK END 0.313 IN. MIN,0.314 IN. MAX DIA,HOLE 0.625 IN. DEEP IN SHANK END
HGTH	HEIGHT	1.150 INCHES NOMINAL
MATT	MATERIAL	STEEL COMP 304 OVERALL
STYL	STYLE DESIGNATOR	GROOVE

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	No qup
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	095190 - Hardware, noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware