Buy 03A095-8-39 Bolt Close Toleranc part by Hi Shear Corporation

Part Number: 03A095-8-39

Alternate P/N: 03A095839

Manufacturer: hi shear corporation

NSN: 5306-01-348-6020

NIIN: 013486020

Item Name : bolt close toleranc

CAGE Code: 73197

FSC: 5306 Bolts

INC Code: 27851

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for 03A095-8-39 (described as Bolt Close Toleranc), manufactured by Hi Shear Corporation with CAGE code 73197. This part is registered under NSN 5306-01-348-6020, classified in FSG 53 Hardware and Abrasives / FSC 5306 Bolts. Our verification process will confirm traceability through supporting identifiers including NIIN 01-348-6020, NCB code 01 (origin: USA), and INC 27851. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 03A095-8-39 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 03A095-8-39

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 03A095-8-39, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 03A095-8-39 with NSN 5306-01-348-6020, 5306013486020

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-01-348-6020 Item PartTypeName: BOLT,CLOSE TOLERANCE	5306	013486020	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
03A095-8-39	5	2	5

Characteristics Data of NSN 5306-01-348-6020, 5306013486020

MRC	Criteria	Characteristic
AAUR	GRIP DIAMETER	0.4986 INCHES MINIMUM AND 0.4991 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.500 INCHES
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
AASB	FASTENER LENGTH	3.108 INCHES MINIMUM AND 3.124 INCHES MAXIMUM
AASU	HEAD HEIGHT	0.251 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
AATB	WIDTH BETWEEN FLATS	0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
ANEE	GRIP LENGTH	2.438 INCHES MINIMUM AND 2.454 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	20
CQBC	MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.978 INCHES MINIMUM AND 2.994 INCHES MAXIMUM FIRST HOLE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNJF
AASK	HEAD STYLE	HEXAGON
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
MATT	MATERIAL	NICKEL ALLOY 718 OVERALL

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7508900000 (NAICS 332999)	Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
SITC : 69975	Articles of nickel, n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	Sf9---n
Quantity per pack	No qup
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	573 - Bolts or nuts (iron or steel),(less than 35 feet)