Buy 156PS123 Resistor Variable N part by Honeywell International Inc

Part Number:  156PS123
Manufacturer:  honeywell international inc
NIIN:  008355349
Item Name :  resistor variable n
CAGE Code:  08815
INC Code:  37405
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 156PS123 (described as Resistor Variable N), manufactured by Honeywell International Inc with CAGE code 08815. This part is registered under NSN 5905-00-835-5349, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-835-5349, NCB code 00 (origin: USA), and INC 37405. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 156PS123 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 156PS123

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 156PS123, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 156PS123 with NSN 5905-00-835-5349, 5905008355349

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-835-5349

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050083553490NB
CIICHCCESDPMICCriticalityENAC
UBU
Part NumberISCRNVCRNCCHCCMSDSSADC
156PS123225

Characteristics Data of NSN 5905-00-835-5349, 5905008355349

MRCCriteriaCharacteristic
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL TAB/FLANGE MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABHPOVERALL LENGTH1.290 INCHES NOMINAL
ABPMBODY DIAMETER1.297 INCHES MINIMUM AND 1.328 INCHES MAXIMUM
ABTDMOUNTING SLOT WIDTH0.119 INCHES MINIMUM AND 0.129 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.187 INCHES NOMINAL
ABXFSHAFT LENGTH0.470 INCHES MINIMUM AND 0.490 INCHES MAXIMUM
ADAVOVERALL DIAMETER1.750 INCHES NOMINAL
AEDXSHAFT STYLEROUND,UNDERCUT
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION240.0 MINIMUM
AEFKMAXIMUM STARTING TORQUE0.50 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.50 INCH-OUNCES
AGTPLATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS1.526 INCHES MINIMUM AND 1.536 INCHES MAXIMUM
AKPVMOUNTING FACILITY QUANTITY2
AXGYMOUNTING METHODFLANGE AND SLOT
CQCCELECTRICAL RESISTANCE PER SECTION150.0 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQTMTERMINAL LOCATIONREAR END
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-40.0 TO 30.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
FEATSPECIAL FEATURES1 WATT AT 80 DEG C
TESTTEST DATA DOCUMENT18876-9175703 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
ADAQBODY LENGTH0.810 INCHES MAXIMUM
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT-15.0 TO 15.0 SINGLE SECTION
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER20.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY3 TURRET

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top