Buy 5315PL1025381 Pin Shoulder Headle part by Inspektorat Wsparcia Sil Zbrojnych

Part Number: 5315PL1025381

Manufacturer: inspektorat wsparcia sil zbrojnych

NSN: 5315-00-304-2995

NIIN: 003042995

Item Name : pin shoulder headle

CAGE Code: 9009H

FSC: 5315 Nails Keys and Pins

INC Code: 16749

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for 5315PL1025381 (described as Pin Shoulder Headle), manufactured by Inspektorat Wsparcia Sil Zbrojnych with CAGE code 9009H. This part is registered under NSN 5315-00-304-2995, classified in FSG 53 Hardware and Abrasives / FSC 5315 Nails Keys and Pins. Our verification process will confirm traceability through supporting identifiers including NIIN 00-304-2995, NCB code 00 (origin: USA), and INC 16749. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 5315PL1025381 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 5315PL1025381

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 5315PL1025381, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 5315PL1025381 with NSN 5315-00-304-2995, 5315003042995

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5315-00-304-2995 Item PartTypeName: PIN,SHOULDER,HEADLESS	5315	003042995	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
339132	2	2	3

Characteristics Data of NSN 5315-00-304-2995, 5315003042995

MRC	Criteria	Characteristic
AAGZ	FIRST END STYLE	SQUARE
AATR	SHANK LENGTH	0.610 INCHES NOMINAL
AAVH	SHOULDER DIAMETER	0.434 INCHES MINIMUM AND 0.435 INCHES MAXIMUM
AAZE	SHANK DIAMETER	0.868 INCHES MINIMUM AND 0.869 INCHES MAXIMUM
ABHP	OVERALL LENGTH	4.000 INCHES NOMINAL
ABPA	UNDERCUT DIAMETER	0.688 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
ABPD	SECOND UNDERCUT WIDTH	0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
ABPF	SECOND UNDERCUT DIAMETER	0.688 INCHES NOMINAL
CQBB	SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
CQSX	SHEAR STRENGTH	180000 SINGLE POUNDS PER SQUARE INCH
CQTR	SECOND SHANK DIAMETER	0.868 INCHES MINIMUM AND 0.869 INCHES MAXIMUM
CRDY	FIRST END LOCATION	BOTH ENDS
CWAS	SECOND SHANK LENGTH	1.075 INCHES NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	PIN,CREW DOOR HINGE
FEAT	SPECIAL FEATURES	DIMENTIONS APPLY AFTER SOLID FILM LUB PLATING;PIN HAS TWO SHOULDERS,ONE ON EACH END AND A THIRD SHOULD THAT IS UNDERCUT IN THE CENTER
MATT	MATERIAL	STEEL COMP 8740 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6049,CONDC-4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
STYL	STYLE DESIGNATOR	UNDERCUT

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Sf9sx-n
Quantity per pack	5
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	095190 - Hardware, noi sub 9
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware