Buy 5905PL0646440 Resistor Variable N part by Inspektorat Wsparcia Sil Zbrojnych

Part Number: 5905PL0646440

Manufacturer: inspektorat wsparcia sil zbrojnych

NSN: 5905-01-054-6227

NIIN: 010546227

Item Name : resistor variable n

CAGE Code: 9009H

FSC: 5905 Resistors

INC Code: 37405

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for 5905PL0646440 (described as Resistor Variable N), manufactured by Inspektorat Wsparcia Sil Zbrojnych with CAGE code 9009H. This part is registered under NSN 5905-01-054-6227, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 01-054-6227, NCB code 01 (origin: USA), and INC 37405. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 5905PL0646440 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 5905PL0646440

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 5905PL0646440, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 5905PL0646440 with NSN 5905-01-054-6227, 5905010546227

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-01-054-6227 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND	5905	010546227	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
128-5031	2	9	5

Characteristics Data of NSN 5905-01-054-6227, 5905010546227

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	3
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AAVL	PILOT DIAMETER	0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM
AAVM	PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABHP	OVERALL LENGTH	2.291 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.975 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0570 INCHES NOMINAL
ABPM	BODY DIAMETER	1.092 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.4687 INCHES MINIMUM AND 0.5313 INCHES MAXIMUM
ADAQ	BODY LENGTH	1.760 INCHES MAXIMUM
ADAV	OVERALL DIAMETER	1.092 INCHES MAXIMUM
AECZ	MOUNTING LIP DIAMETER	1.0520 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM
AEDA	MOUNTING LIP DEPTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	345.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	0.20 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	0.20 INCH-OUNCES
AEFY	SHAFT END PLAY	0.00500 INCHES
AEFZ	SHAFT RUNOUT	0.002 INCHES
AEGA	LATERAL RUNOUT	0.002 INCHES
AEGB	PILOT DIAMETER RUNOUT	0.00100 INCHES
AEGC	SHAFT RADIAL PLAY	0.001 INCHES
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AXGY	MOUNTING METHOD	CLAMP RING
CBME	CUBIC MEASURE	2.146 CUBIC INCHES
CQCC	ELECTRICAL RESISTANCE PER SECTION	100.0 KILOHMS ALL SECTIONS
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
CQDB	RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT	-5.0 TO 5.0-65 DEG CELSIUS ALL SECTIONS AND-4.0 TO 4.0-15 DEG CELSIUS ALL SECTIONS AND-2.5 TO 2.5 50 DEG CELSIUS ALL SECTIONS AND-5.0 TO 5.0 75 DEG CELSIUS ALL SECTIONS AND-5.0 TO 5.0 105 DEG CELSIUS ALL SECTIONS AND-5.0 TO 5.0 125 D
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	-0.25 TO 0.25 ALL SECTIONS
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 ALL SECTIONS
CQTM	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	1.25 FREE AIR ALL SECTIONS
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 ALL SECTIONS
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
CSBX	FUNCTION CHARACTERISTIC PER SECTION	ALL SECTIONS LINEAR
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	70.0 ALL SECTIONS
CXHN	SHAFT BEARING TYPE	BEARING
TTQY	TERMINAL TYPE AND QUANTITY	9 TURRET

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8533400080 (NAICS 334416)	Variable resistors, including potentiometers, nesoi
SITC : 77235	Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	B - Represents items with esd sensitivity.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	Sf9eh-v
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	062960 - Reostats/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	3 - Electrostatic sensitive device (esd)
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components