Buy DPX2NE67322 76 Connector Receptacl part by Itt Corporation

Part Number: DPX2NE67322 76

Manufacturer: itt corporation

NSN: 5935-01-154-4660

NIIN: 011544660

Item Name : connector receptacl

CAGE Code: 71468

FSC: 5935 Connectors Electrical

INC Code: 15093

Country: USA

NCB Code: 01

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for DPX2NE67322 76 (described as Connector Receptacl), manufactured by Itt Corporation with CAGE code 71468. This part is registered under NSN 5935-01-154-4660, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 01-154-4660, NCB code 01 (origin: USA), and INC 15093. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your DPX2NE67322 76 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DPX2NE67322 76

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Verify you’re human

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part DPX2NE67322 76, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number DPX2NE67322 76 with NSN 5935-01-154-4660, 5935011544660

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5935-01-154-4660 Item PartTypeName: CONNECTOR,RECEPTACLE,ELECTRICAL	5935	011544660	0	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10131479	5	9	6

Characteristics Data of NSN 5935-01-154-4660, 5935011544660

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2B
AAJF	THREAD DIRECTION	RIGHT-HAND
AAQL	BODY STYLE	STRAIGHT SHAPE,FLUSH MOUNT
ABHP	OVERALL LENGTH	1.700 INCHES MAXIMUM
ABKW	OVERALL HEIGHT	3.060 INCHES MINIMUM AND 3.090 INCHES MAXIMUM
ABMK	OVERALL WIDTH	1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM
ADZC	ENVIRONMENTAL PROTECTION	CORROSION RESISTANT AND THERMAL SHOCK RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.118 INCHES MINIMUM AND 0.122 INCHES MAXIMUM
AEBW	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	2.782 INCHES NOMINAL
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.436 INCHES NOMINAL
AFQK	DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM
AFQR	THREADED DEVICE TYPE	COUPLING FACILITY
AFQW	MATING END QUANTITY	2
AFQX	CONTACT POSITION ARRANGEMENT STYLE	106,A106
AFQZ	CONTACT REMOVABILITY	REMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
AFRT	SHELL TYPE	SOLID
AFRV	CONNECTOR LOCKING METHOD	POST JACKSOCKET
CMLP	THREAD QUANTITY PER INCH	24
CQJX	NOMINAL THREAD SIZE	0.190 INCHES
CQTM	TERMINAL LOCATION	BACK ALL MATING ENDS SINGLE CONTACT GROUPING
CQTZ	CONTACT MATERIAL	COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CQYH	CONTACT SURFACE TREATMENT	GOLD ALL MATING ENDS SINGLE CONTACT GROUPING
CQZG	INSERT MATERIAL	PLASTIC PHENOLIC SINGLE MATING END
CRBJ	CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CSCF	TERMINAL TYPE	CRIMP ALL MATING ENDS SINGLE CONTACT GROUPING
CSLR	GUIDE DESIGN AND LOCATION	HEXAGON SHAPE MALE POST LEFT-HAND AND HEXAGON SHAPE MALE POST RIGHT-HAND AT 6 OCLOCK
CSPT	SHELL MATERIAL	ALUMINUM ALLOY
CSWM	SHELL SURFACE TREATMENT	CADMIUM
CTBC	SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE
CTHH	SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE
CTKL	INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-14 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CXCL	INCLUDED CONTACT TYPE	ROUND SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING
FEAT	SPECIAL FEATURES	JACKSCREW TYPE-FEMALE AND LOCATION-CENTER
PMLC	PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PMWT	PRECIOUS MATERIAL AND WEIGHT	0.212 GOLD GRAINS,TROY
PRMT	PRECIOUS MATERIAL	GOLD
THSD	THREAD SERIES DESIGNATOR	UNC

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8538907080 (NAICS 335314)	Parts suitable for use solely or principally with the apparatus for heading 8535, 8536, 8537, nesoi
SITC : 77282	Parts of electrical apparatus for switching or protecting electrical circuits for making connections to or in electrical circuits, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	G - Item contains gold.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	061680 - Elec wiring plugs etc
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small