We've received your request for 31P00024 (described as Gasket), manufactured by J Dak Inc with CAGE code 0SHR6. This part is registered under NSN 5330-01-480-6088, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-480-6088, NCB code 01 (origin: USA), and INC 04522. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 31P00024 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-01-480-6088 Item PartTypeName: GASKET | 5330 | 014806088 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 31P00024 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.144 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.204 INCHES NOMINAL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.125 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | TRUCK VAN,2320-01-354-3384 |
| AECS | BOLT HOLE QUANTITY | 2 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MILL GASKET |
| FEAT | SPECIAL FEATURES | SIMLAR TO A RECTANGLE EXCEPT IT HAS TWO PROTRUDEING TAILS;ONE ON EITHER SIDE OF THE OVER ALL WIDTH;ONE TAIL IS 0.925 IN THE OTHER IS 0.498 IN;BOTH ARE 0.187 IN WIDE |
| ABMK | OVERALL WIDTH | 2.180 INCHES NOMINAL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| MATT | MATERIAL | RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM OVERALL |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 596 - Gaskets, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
