Buy 46RHS463-088 Meter Audio Level part by Jewell Instruments Llc

Part Number:  46RHS463-088
Alternate P/N:  46RHS463088
Manufacturer:  jewell instruments llc
NIIN:  006432783
Item Name :  meter audio level
CAGE Code:  15309
INC Code:  16456
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 46RHS463-088 (described as Meter Audio Level), manufactured by Jewell Instruments Llc with CAGE code 15309. This part is registered under NSN 6625-00-643-2783, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-643-2783, NCB code 00 (origin: USA), and INC 16456. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 46RHS463-088 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 46RHS463-088

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 46RHS463-088, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-643-2783, 6625006432783

MRCCriteriaCharacteristic
AXHRMOUNTING FACILITY TYPE AND QUANTITY3 SCREW AND 3 UNTHREADED HOLE
APMMDIAL SCALE MARKING COLORBLACK SINGLE INDICATOR ALL RANGES
CTQLMOVEMENT SUSPENSION METHODJEWEL PIVOT BASE
AFFLMOUNTING BOLT CIRCLE DIAMETER3.125 INCHES NOMINAL
ASSSPOINTER COLORBLACK SINGLE INDICATOR ALL RANGES
AACTCIRCUIT CURRENT FOR WHICH DESIGNEDDC
BHMWMEASUREMENT RANGE-20.0 TO 2.0 DECIBELS SINGLE INDICATOR 1ST RANGE 2.0 TO 16.0 DECIBELS SINGLE INDICATOR 2ND RANGE 16.0 TO 30.0 DECIBELS SINGLE INDICATOR 3RD RANGE
ANTGSENSITIVITY RATING600.0 OHMS
AQECMOVEMENT TYPEMOVING COIL, PERMANENT MAGNET
BHDCSCALE GRADUATION TYPENONLINEAR SINGLE INDICATOR ALL RANGES
AAPBDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS1500.0
AMQYINSTALLATION DESIGNPANEL
ADZCENVIRONMENTAL PROTECTIONAIRTIGHT AND DUST RESISTANT AND FUNGUS RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT
AQFYBACKGROUND COLORCREAM SINGLE INDICATOR ALL RANGES
AWZJPOWER SOURCEEXTERNAL
ABTBMOUNTING HOLE DIAMETER0.156 INCHES NOMINAL
SFTTSURFACE TREATMENTCADMIUM AND CHROMATE
FEATSPECIAL FEATURESRUGGEDIZED
ABHPOVERALL LENGTH2.062 INCHES NOMINAL
ADAVOVERALL DIAMETER3.500 INCHES NOMINAL
AKYNFURNISHED ITEMS AND QUANTITYNUT 3; LOCKWASHER 3; SEAL 1
BLSBSCALE SELECTION METHODTERMINAL
ANRLMOUNTING ARRANGEMENT STYLETHREE HOLE/STUD BOLT CIRCLE
MARKSPECIAL MARKINGSON FRONT,0 DB= .001 WATTS-600 OHMS
APSN(NON-CORE DATA) PANEL FOR WHICH DESIGNEDMAGNETIC
ZZZVIII FSC APPLICATION DATATEST SET,ELECT. EQUIP.
APSTMETER DEPTH BEHIND MOUNTING FLANGE1.531 INCHES NOMINAL
CBBLFEATURES PROVIDEDZERO ADJUSTER
APSWMETER BODY DIAMETER BEHIND MOUNTING FLANGE2.750 INCHES NOMINAL
MATTMATERIALSTEEL
STYLSTYLE DESIGNATORC1 ROUND FLUSH MTG
APPNACCURACY IN PERCENT-2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES
CTTDCIRCUIT ATTACHMENT METHOD AND QUANTITY2 SOLDER LUG
BHSX(NON-CORE DATA) CIRCUIT CONSTRUCTION TYPENONELECTRONIC
NHCFNUCLEAR HARDNESS CRITICAL FEATURENONHARDENED
AMKDINDICATOR TYPEDIAL W/POINTER

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL Sf9---n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 657 - Instruments, electric meter

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top