We've received your request for 135617 (C2) ITE (described as Seal Plain Encased), manufactured by Johnson Bronze Co with CAGE code 96070. This part is registered under NSN 5330-00-789-7495, classified in FSG 53 Hardware and Abrasives / FSC 5330 Packing and Gasket Materials. Our verification process will confirm traceability through supporting identifiers including NIIN 00-789-7495, NCB code 00 (origin: USA), and INC 04214. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 135617 (C2) ITE requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-789-7495 Item PartTypeName: SEAL,PLAIN ENCASED | 5330 | 007897495 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10395450 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHE | OUTSIDE DIAMETER | 1.004 INCHES NOMINAL |
| ABVM | ACCOMMODATED SHAFT DIAMETER | 0.748 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| ADUC | SEAL WIDTH | 0.125 INCHES NOMINAL |
| BHHL | CASE STYLE | SQUARE |
| CPCW | HOUSING BORE DIAMETER | 0.999 INCHES MINIMUM AND 1.001 INCHES MAXIMUM |
| CTQC | SEALING ELEMENT STYLE | VERTICAL |
| CTQW | MAXIMUM PRESSURE RATING | 7.0 POUNDS PER SQUARE INCH |
| AEAT | ACCOMMODATED SHAFT MAXIMUM RATED SPEED | 1000 FEET PER MINUTE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEALING ELEMENT |
| MATT | MATERIAL | STEEL COMP 1017 CASE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D2000 ASSN STD SINGLE MATERIAL RESPONSE SEALING ELEMENT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-636 FED SPEC SINGLE MATERIAL RESPONSE CASE |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8484200000 (NAICS 339991) | Mechanical seals |
| SITC : 74920 | Gaskets and similar joints of metal sheeting combined with other materials or layers of metal; sets or assortments of gaskets and similar joints etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 596 - Gaskets, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
