Buy MDR P70DA-1STY13 Switch Pressure part by Johnson Controls Inc

Part Number:  MDR P70DA-1STY13
Alternate P/N:  MDRP70DA1STY13
Manufacturer:  johnson controls inc
NIIN:  010796476
Item Name :  switch pressure
CAGE Code:  50831
FSC:  5930 Switches
INC Code:  00206
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for MDR P70DA-1STY13 (described as Switch Pressure), manufactured by Johnson Controls Inc with CAGE code 50831. This part is registered under NSN 5930-01-079-6476, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5930 Switches. Our verification process will confirm traceability through supporting identifiers including NIIN 01-079-6476, NCB code 01 (origin: USA), and INC 00206. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MDR P70DA-1STY13 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MDR P70DA-1STY13

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part MDR P70DA-1STY13, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MDR P70DA-1STY13 with NSN 5930-01-079-6476, 5930010796476

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5930-01-079-6476

Item PartTypeName:

SWITCH,PRESSURE

59300107964760P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
13217E0096525

Characteristics Data of NSN 5930-01-079-6476, 5930010796476

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH4.600 INCHES NOMINAL
ABKWOVERALL HEIGHT2.090 INCHES NOMINAL
ABMKOVERALL WIDTH3.980 INCHES NOMINAL
ABTDMOUNTING SLOT WIDTH0.375 INCHES NOMINAL
ADAQBODY LENGTH3.250 INCHES NOMINAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.203 INCHES NOMINAL
AEJNDISTANCE BETWEEN MOUNTING FACILITY CENTERS3.250 INCHES NOMINAL
AFDSLONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS1.120 INCHES NOMINAL
AFDTSHORTEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS0.330 INCHES NOMINAL
AGAVEND ITEM IDENTIFICATIONUSE ON AIR CONDITIONER,FLOOR MOUNTED-NSN 4120-01-077-6931
AJZCPRESSURE SWITCH TYPEGAGE
AWTNOPERATING TEMP RATING-60.0 DEG FAHRENHEIT MINIMUM AND 125.0 DEG FAHRENHEIT MAXIMUM
AXGYMOUNTING METHODUNTHREADED HOLE AND SLOT
CQGBCONTACT ACTION STIMULUSINCREASE
CQJBPROOF PRESSURE175.00 POUNDS PER SQUARE INCH
CQYJMOUNTING FACILITY PATTERNTWO POSITION DIAGONAL
CRLDNONPILE-UP CONTACT ARRANGEMENT1 POLE,SINGLE THROW,DOUBLE MAKE,BOTH POSITIONS MAINTAINED
CSCFTERMINAL TYPESCREW
CTHFCONTACT LOAD CURRENT RATING17.0 AMPERES RESISTIVE LOAD SECOND VOLTAGE
CTHFCONTACT LOAD CURRENT RATING20.0 AMPERES RESISTIVE LOAD FIRST VOLTAGE
CTHFCONTACT LOAD CURRENT RATING8.0 AMPERES RESISTIVE LOAD THIRD VOLTAGE
CTYCCONTACT ADJUSTABILITYACTUATION POINT ADJUSTABLE
CTYMCONTACT ADJUSTMENT RANGE60.00 TO 100.00 ACTUATION POINT POUNDS PER SQUARE INCH ABSOLUTE
CTZBCONTACT VOLTAGE RATING IN VOLTS120.0 AC AT SEA LEVEL FIRST VOLTAGE
CTZBCONTACT VOLTAGE RATING IN VOLTS208.0 AC AT SEA LEVEL SECOND VOLTAGE
CTZBCONTACT VOLTAGE RATING IN VOLTS240.0 AC AT SEA LEVEL THIRD VOLTAGE
FREQFREQUENCY IN HERTZ200.0 SECOND VOLTAGE
FREQFREQUENCY IN HERTZ400.0 THIRD VOLTAGE
FREQFREQUENCY IN HERTZ60.0 FIRST VOLTAGE
MEDAMEDIA FOR WHICH DESIGNEDGAS
STYLSTYLE DESIGNATORRECTANGULAR

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8536509065 (NAICS 335931) Switches, for a voltage not exceeding 1000 volts, nesoi
SITC : 77255 Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Q2200x-
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top