Buy 102D784 Test Set Radio part by Joint Electronics Type Designation System

Part Number:  102D784
NIIN:  006488348
Item Name :  test set radio
CAGE Code:  80058
INC Code:  03662
Country:  USA
NCB Code:  00

We've received your request for 102D784 (described as Test Set Radio), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 6625-00-648-8348, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-648-8348, NCB code 00 (origin: USA), and INC 03662. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 102D784 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 102D784

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 102D784, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-648-8348, 6625006488348

MRCCriteriaCharacteristic
AFHSACCESSORY COMPONENT QUANTITY1 AND 1 AND 1 AND 1 AND 1 AND 1 AND 2
AEASMAJOR COMPONENTSSIGNAL GENERATOR; SIGNAL GENERATOR; TEST SET SUBASSEMBLY; TEST SET COVER; RF COUPLER DETECTOR; ELECTRICAL CORD ASSEMBLY; MTG
SR-5MANUFACTURERS CODE99872
SR-5DESIGN CONTROL REFERENCE102D784
AKVYACCESSORY CONTROLLING AGENCYJCENS
AKWBJOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM TYPE NUMBERTYPE NO. AN/TRM-1
ABGLWIDTH9.500 INCHES NOMINAL
ANPZINCLOSURE FEATUREMULTIPLE ITEM W/CARRYING CASE
AQXZOPERATING TEST CAPABILITYTRANSMITTER PERFORMANCE TESTER,FREQUENCY RANGE,190 KC TO 400 MC,POWER RANGE,3 TO 100 W,PCT OF MODULATION RANGE,200 TO 6000 CPS,20 TO 100 PCT,OVER-MODULATION RANGE,200 TO 6000 CPS,60 TO 120 PCT; RECEIVER AUDIO FREQUENCY VOLTAGE TESTER,FREQ,1000 CPS,OUTPUT,0.05 TO 3 V WHEN TERMINATED IN 82 OHMS,SIGNAL TO NOISE RATIO; VOLTMETER,RANGE 0 TO 3/30/300 V AC,SENSITIVITY,5000 OHMS PER V,RANGE 0 TO 3/30/300/600 V DC,SENSITIVITY,20000 OHMS PER V; VOLT-MILLIWATT METER,RANGE 0 TO 10/100/1000 MW; SIGNAL GENERATOR RANGE 190 KC TO 30 MC AND 50 MC TO 400 MC,OUTPUT 2.5 UV TO 0.1 V,INTERNAL MODULATION 1000 CPS
ABRYLENGTH17.300 INCHES NOMINAL
AQXYTEST TYPE FOR WHICH DESIGNEDAIRCRAFT RADIO RECEIVER PERFORMANCE MEASUREMENTS; AC AND DC VOLTAGE AND POWER MEASUREMENTS
AKWAJOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM NAMETEST SET,RADIO
ACYNAC VOLTAGE RATING105.0 VOLTS MINIMUM AND 125.0 VOLTS MAXIMUM
SR-5THE MANUFACTURERS DATA
HGTHHEIGHT12.500 INCHES NOMINAL
ANNQMATERIAL AND LOCATIONALUMINUM ALLOY CARRYING CASE

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 1rfxbs9
Quantity per pack 1
Repariability When repair is beyond lower level maintenance capability, evacuate the item to depot. disposal is not authorized below wholesale level.
Shelf Life N/A
SOS N32
Unit of Measure Ea

Freight Information

ACC: A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: Q - High sensitivity, category ii, aa&e, classified confidential
TCC: Z - No special type of cargo code applicable
WCC: 653 - Musical instruments

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top