Buy ANARM31 Test Set Indicator part by Joint Electronics Type Designation System

Part Number:  ANARM31
NIIN:  001812413
Item Name :  test set indicator
CAGE Code:  80058
INC Code:  03647
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for ANARM31 (described as Test Set Indicator), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 6625-00-181-2413, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-181-2413, NCB code 00 (origin: USA), and INC 03647. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your ANARM31 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ANARM31

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part ANARM31, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-181-2413, 6625001812413

MRCCriteriaCharacteristic
SR-5MANUFACTURERS CODE97057
FAAZPHASESINGLE
SR-5DESIGN CONTROL REFERENCE51D1286-1
ABRYLENGTH23.500 INCHES NOMINAL
AKVZACCESSORY IDENTIFYING NUMBER666097-014 PART NO. AND 666097-004 PART NO. AND 666097-005 PART NO. AND 666097-006 PART NO.
ANNQMATERIAL AND LOCATIONALUMINUM CARRYING CASE
ABGLWIDTH30.250 INCHES NOMINAL
ANPZINCLOSURE FEATUREMULTIPLE ITEM W/CARRYING CASE
ACYRDC VOLTAGE RATING24.0 VOLTS MINIMUM 1ST ALTERNATE OPERATING POWER RQMT 29.0 VOLTS MAXIMUM 2ND ALTERNATE OPERATING POWER RQMT
AQXYTEST TYPE FOR WHICH DESIGNEDMEASURE RANGE AND BEARING ACCURACY OF AN/ARN21; MONITOR IDENTITY TONE OF AN/ARN21; MEASURE CU-3950ARN-21A RANGE AND BEARING REPEATING ACCURACY; MEASURE ID-307/ARN BEARING REPEATING ACCURACY; CHECK RANGE POTENTIOMETERS IN CU-395 AND TD-310; CHECK NORTH REFERENCE RELAY IN CU-395; CHECK PHASE DISCRIMINATOR CIRCUITS OF CU-395 OR CV-279
AQXZOPERATING TEST CAPABILITYCOMPASS SIMULATOR BEARING READINGS 0 TO 3600; COURSE INDICATOR DEVIATION FROM SELECTED COURSE; RELATIVE BEARING 0 TO 3600; COURSE INDICATOR ACTUAL BEARING 0 TO 3600; RELATIVE BEARING 0 TO 3600; RANGE INDICATOR DISTANCE READINGS 0 TO 195 MILES; MASTER RANGE UNIT DISTANCE READINGS 0 TO 195 MILES; MASTER BEARING UNIT BEARING READINGS 0 TO 3600; NULL METER 0 TO 200 MICROAMPERES
ACZBFREQUENCY RATING50.0 HERTZ MINIMUM 1ST ALTERNATE OPERATING POWER RQMT 420.0 HERTZ MAXIMUM 2ND ALTERNATE OPERATING POWER RQMT
AKWBJOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM TYPE NUMBERAN/ARM31
ACYNAC VOLTAGE RATING103.5 VOLTS MINIMUM 1ST ALTERNATE OPERATING POWER RQMT 126.5 VOLTS MAXIMUM 2ND ALTERNATE OPERATING POWER RQMT
AKWCELECTRICAL POWER SOURCE RELATIONSHIPOPERATING
AKWAJOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM NAMETEST SET,INDICATOR
SR-5THE MANUFACTURERS DATA
HGTHHEIGHT23.000 INCHES NOMINAL
AFHSACCESSORY COMPONENT QUANTITY4
AKVYACCESSORY CONTROLLING AGENCYSTROMBERG-CALLSON

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control 7
MGMT_CTL 6rexbs-
Quantity per pack 1
Repariability * special program reparables
Shelf Life N/A
SOS N32
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: W - Rating variable
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top