Buy 616A Generator Signal part by Joint Electronics Type Designation System

Part Number:  616A
NIIN:  005191860
Item Name :  generator signal
CAGE Code:  80058
INC Code:  03901
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 616A (described as Generator Signal), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 6625-00-519-1860, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-519-1860, NCB code 00 (origin: USA), and INC 03901. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 616A requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 616A

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 616A, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-519-1860, 6625005191860

MRCCriteriaCharacteristic
BHFZCALIBRATED SIGNAL OUTPUT RANGE0.1 UV TO 0.224 V
AFGQFREQUENCY RANGE RATING1.800 TO 4.000 GIGAHERTZ
BDHWCALIBRATION ACCURACY RATINGPORM 1 PERCENT
ACDCCURRENT TYPEAC
AFHSACCESSORY COMPONENT QUANTITY1 AND 1 AND 2 AND 3 AND 1
SR-5MANUFACTURERS CODE80058
SR-5THE MANUFACTURERS DATA
FEATSPECIAL FEATURESMETAL PANEL
BHGCSIGNAL OUTPUT CONSTANCYPORM 2 DB MAX VARIATION THROUGHOUT FREQUENCY RANGE
AMSEVOLTAGE RATING105.0 VOLTS MINIMUM AND 125.0 VOLTS MAXIMUM
AMNEOUTPUT IMPEDANCE RATING50.0 OHMS NOMINAL
FAAZPHASESINGLE
AZCGACCESSORY COMPONENT NAMECASE; CORD; CORD; ADAPTER; CORD
BHFYCRYSTAL CONTROLLED FEATURENOT PROVIDED
SR-5DESIGN CONTROL REFERENCETS403U
ABHPOVERALL LENGTH17.500 INCHES NOMINAL
ZZZYREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS MANUFACTURED BY HEWLETT PACKARD CO
AYYEMODULATION TYPEPULSE AND FM
AKVYACCESSORY CONTROLLING AGENCYJCENS; JCENS; JCENS; JCENS; JCENS
BHQDMODULATED FREQUENCY RATING1.6 KILOHERTZ NOMINAL
BHQFPULSE REPETITION FREQUENCY RATING0.04 KILOHERTZ MINIMUM AND 4.00 KILOHERTZ MAXIMUM
BHQGMODULATION DEGREE0.5 USEC PULSE MINIMUM AND 10.0 USEC PULSE MAXIMUM AND 0.5 PERCENT NOMINAL
AAXXMOUNTING TYPERACK
ADTVCASE MATERIALWOOD
ABMKOVERALL WIDTH13.500 INCHES NOMINAL
BHGDMODULATOR LOCATIONINTERNAL
ACZBFREQUENCY RATING0.05 KILOHERTZ MINIMUM AND 1.60 KILOHERTZ MAXIMUM
AKVZACCESSORY IDENTIFYING NUMBERCY-699/U TYPE NO. AND CX-337/U TYPE NO. AND CG-409/U TYPE NO. AND UG-273/U TYPE NO. AND CG-92B/U TYPE NO.
ABKWOVERALL HEIGHT14.000 INCHES NOMINAL
ANLCFREQUENCY BAND QUANTITY1

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8543200000 (NAICS 334515) Signal generators
SITC : 77878 Electrical machines and apparatus, having individual functions, n.E.S. (other than particle accelerators)

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 6gtear-
Quantity per pack 1
Repariability If condemned or uneconomically repairable, then dispose at intermediate level.
Shelf Life N/A
SOS N35
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: W - Rating variable
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top