Buy MIL0-15458A Oscilloscope part by Joint Electronics Type Designation System

Part Number:  MIL0-15458A
Alternate P/N:  MIL015458A
NIIN:  006689461
Item Name :  oscilloscope
CAGE Code:  80058
INC Code:  00357
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for MIL0-15458A (described as Oscilloscope), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 6625-00-668-9461, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-668-9461, NCB code 00 (origin: USA), and INC 00357. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MIL0-15458A requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MIL0-15458A

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part MIL0-15458A, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-668-9461, 6625006689461

MRCCriteriaCharacteristic
BGQMGENERATOR DRIVEN FEATURENOT INCLUDED
BHFFCALIBRATED SCREEN SCALENOT INCLUDED
BHFHTRACE STORAGE TUBENOT INCLUDED
BHDWX-AXIS INPUT IMPEDANCE RATING5.6 MEGOHMS NOMINAL
FAAZPHASESINGLE
BGQNSWEEP CIRCUIT TYPEHORIZONTAL AND VERTICAL
BGQKSCREEN SIZE3 IN.
BHDFVERTICAL DEFLECTION SENSITIVITY VOLTAGE RATING50.0 MILLIVOLTS NOMINAL RMS PER INCH
BHDHINPUT INTENSITY MODULATION FEATURENOT PROVIDED
BHDLPLATE DIRECT CONNECTION DEFLECTION SENSITIVITY PROVISIONPROVIDED
BHDMDIRECT CONNECTION VERTICAL DEFLECTION SENSITIVITY VOLTAGE RATING110.0 VOLTS NOMINAL RMS PER INCH
BGQLSWEEP CIRCUITSINCLUDED
BHDNDIRECT CONNECTION HORIZONTAL DEFLECTION SENSITIVITY VOLTAGE RATING150.0 VOLTS NOMINAL RMS PER INCH
BHDQX-AXIS FREQUENCY RESPONSE RATING8.0 HERTZ MINIMUM AND 800000.0 HERTZ MAXIMUM
BHDRY-AXIS FREQUENCY RESPONSE RATING2.0 HERTZ MINIMUM AND 8000000.0 HERTZ MAXIMUM
BHDSZ-AXIS FREQUENCY RESPONSE RATING6.0 HERTZ MINIMUM AND 5000000.0 HERTZ MAXIMUM
BHDXY-AXIS INPUT IMPEDANCE RATING300.0 KILOHMS NOMINAL
BHDYZ-AXIS INPUT IMPEDANCE RATING56.0 KILOHMS NOMINAL
BHFTCAMERA RECORDING DEVICE ACCOMMODATIONNOT PROVIDED
AMSEVOLTAGE RATING100.0 VOLTS MINIMUM AND 130.0 VOLTS MAXIMUM
AXGYMOUNTING METHODTABLE
BHDDAMPLIFIER DEFLECTION SENSITIVITY PROVISIONPROVIDED
BHDPFREQUENCY RESPONSE RATINGPROVIDED
BHDTAMPLIFIER INPUT IMPEDANCE RATING PROVISIONPROVIDED
BGRZTRIGGER SWEEP VOLTAGE AMPLITUDE RATING50.0 VOLTS NOMINAL
BGSBTRIGGER SWEEP POLARITY SWITCHINCLUDED
BGSDEXPANDED SWEEPNOT PROVIDED
SR-1MANUFACTURERS CODE81349
BHDGHORIZONTAL DEFLECTION SENSITIVITY VOLTAGE RATING3.5 VOLTS NOMINAL RMS PER INCH
ATESBEAM QUANTITY1
ABKWOVERALL HEIGHT14.906 INCHES NOMINAL
ABMKOVERALL WIDTH12.594 INCHES NOMINAL
ACDCCURRENT TYPEAC
ACZBFREQUENCY RATING50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
SR-1NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL0-15458A
BGQQSINGLE TRIGGER SWEEP DURATION3.0 MICROSECONDS NOMINAL
ABHPOVERALL LENGTH16.641 INCHES NOMINAL
BGQPSWEEP FREQUENCY RANGE8.0 TO 800000.0 HERTZ
SR-1SPEC/STD CONTROLLING DATA
BGSCTRIGGER SWEEP MARKER INTERVALS0.2 USEC;1 USEC;10 USEC;100 USEC;500 USEC

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: M - 85.0
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 5 - Low sensitivity, category iv, aa&e, unclassified
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top