Buy AN-GPM-40 Test Set Transponde part by Joint Electronics Type Designation System

Part Number:  AN-GPM-40
Alternate P/N:  ANGPM40
NIIN:  007139068
Item Name :  test set transponde
CAGE Code:  80058
INC Code:  03687
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for AN-GPM-40 (described as Test Set Transponde), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 6625-00-713-9068, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-713-9068, NCB code 00 (origin: USA), and INC 03687. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your AN-GPM-40 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AN-GPM-40

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part AN-GPM-40, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-713-9068, 6625007139068

MRCCriteriaCharacteristic
ANNQMATERIAL AND LOCATIONALUMINUM CARRYING CASE
HGTHHEIGHT14.000 INCHES NOMINAL
ALSFINTERNAL BATTERY ACCOMMODATIONNOT INCLUDED
ABRYLENGTH20.500 INCHES NOMINAL
AFHSACCESSORY COMPONENT QUANTITY1 AND 13 AND 1
FAAZPHASESINGLE
ANPZINCLOSURE FEATUREMULTIPLE ITEM W/CARRYING CASE
AQXYTEST TYPE FOR WHICH DESIGNEDMEASUREMENT OF PULSE POSITION WIDTH AND AMPLITUDE; MEASUREMENT OF TRANSISTOR DATA AND COLLECTOR-BASE CURRENT
AQXZOPERATING TEST CAPABILITYPULSE GENERATOR,PULSE TRAINS /GROUP/ 2 TO 15 PULSES,PULSE TRAIN REPETITION RATE 150 TO 425 PER SEC,AMPLITUDE 0 TO 9 V PK PULSE W 0.2 TO 1.0 USEC; TRIGGER PULSE GENERATOR,AMPLITUDE 15.0 V PK MIN,PULSE W 1.0 USEC REPETITION RATE 150 TO 425 PULSES PER SEC,OUTPUT IMPEDANCE 50 OHM AMPLITUDE 15.0 VPK MIN PULSE W 1.0 USEC,REPETITION RATE 37 TO 106 PULSES PER SEC,OUTPUT IMPEDANCE 50 OHM AMPLITUDE 10 V PK NOM PULSE W 1.0 USEC,REPETITION RATE 150 TO 425 PULSES PER SEC,OUTPUT IMPEDANCE500 OHM; PULSE MEASUREMENT,2 PULSE TRAINS,AMPLITUDE SENSITIVITY 30 V PK MIN PULSE W 0.9 PORM 0.1 USEC,REPETITION RATE 150 TO 425 PULSES PER SEC POSITION PORM 0.0 USEC; TRANSISTOR MEASUREMENT,BETA GAIN 20 TO 25,COLLECTOR-BASE CURRENT 1 TO 75 UA
ACZBFREQUENCY RATING50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
AKVYACCESSORY CONTROLLING AGENCYBELL ACFT CORP
AKVZACCESSORY IDENTIFYING NUMBER60905-009-1 PART NO. AND 60901-004-17 PART NO. AND 60901-007-1 PART NO.
ABGLWIDTH15.000 INCHES NOMINAL
ZZZTNONDEFINITIVE SPEC/STD DATAAN/GPM-40 TYPE
ACYNAC VOLTAGE RATING115.0 VOLTS NOMINAL
AEASMAJOR COMPONENTSTEST SET; CABLE ASSY,RF; CABLE ASSY,SPECIAL PURPOSE,ELECT

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC W
Classification Control U
MGMT_CTL --yrh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Flz
Unit of Measure Ea

Freight Information

ACC: A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: Q - High sensitivity, category ii, aa&e, classified confidential
TCC: Z - No special type of cargo code applicable
WCC: 653 - Musical instruments

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top