Buy TS-4417-G Test Set Electronic part by Joint Electronics Type Designation System

Part Number:  TS-4417-G
Alternate P/N:  TS4417G
NIIN:  013085571
Item Name :  test set electronic
CAGE Code:  80058
INC Code:  61200
Country:  USA
NCB Code:  01
FSG:  66 Instruments And Laboratory Equipment

We've received your request for TS-4417-G (described as Test Set Electronic), manufactured by Joint Electronics Type Designation System with CAGE code 80058. This part is registered under NSN 6625-01-308-5571, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-308-5571, NCB code 01 (origin: USA), and INC 61200. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your TS-4417-G requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TS-4417-G

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part TS-4417-G, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-308-5571, 6625013085571

MRCCriteriaCharacteristic
ACYRDC VOLTAGE RATING18.0 VOLTS MINIMUM AND 32.0 VOLTS MAXIMUM
AEJZDEPTH21.000 INCHES NOMINAL
ALSFINTERNAL BATTERY ACCOMMODATIONNOT INCLUDED
SUPPIII SUPPLEMENTARY FEATURESC/O ALUMINUM CHASSIS WITH HOLDING STATIONS FOR 4 UUT CCA; MATL FIBERGLASS ENCLOSURE WITH INTERNAL ALUMINUM PANEL ASSEMBLY
FEATSPECIAL FEATURESREQUIRES 2 CA-218 ADAPTERS AND 2 RT-1505A R/T UNITS
HGTHHEIGHT23.000 INCHES NOMINAL
SR-5THE MANUFACTURERS DATA
AFHSACCESSORY COMPONENT QUANTITY4 AND 4
AQXYTEST TYPE FOR WHICH DESIGNEDTROUBLESHOOTING
ANPZINCLOSURE FEATUREMULTIPLE ITEM W/CARRYING CASE
SR-5DESIGN CONTROL REFERENCE901827-801-1
FTLDIII FUNCTIONAL DESCRIPTIONPROVIDES INTERCONNECTS AND CONTROLS FOR TESTING/TROUBLESHOOTING THE FOLLOWING TS-1413/TRC TIMING DEVICES,819581-801 MODEM SIGNAL,PROCESSOR CCA; 819583-801 POWER SUPPLY,MODEM CCA; 819579-801 MODEM I/O CCA; AND 819580-801 MODEM ANALOG PROCESSOR CCA; PROVIDES DEPOT LEVEL SUPPORT CAPABILITY FOR SRU FROM MD-1209/G HAVE QUICK II MODEM 901677-801
AKWCELECTRICAL POWER SOURCE RELATIONSHIPOPERATING
SR-5MANUFACTURERS CODE37695
AEASMAJOR COMPONENTSCIRCUIT CARD ASSEMBLIES; CABLES
ABGLWIDTH21.000 INCHES NOMINAL

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control 7
MGMT_CTL --yby-p
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Flz
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: M - 85.0
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: Z - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top