Buy 4C40-465 5-0 0 Filter Band Pass part by K And L Microwave Inc

Part Number:  4C40-465 5-0 0
Alternate P/N:  4C40465500
Manufacturer:  k and l microwave inc
NIIN:  012735331
Item Name :  filter band pass
CAGE Code:  50140
INC Code:  00209
Country:  USA
NCB Code:  01

We've received your request for 4C40-465 5-0 0 (described as Filter Band Pass), manufactured by K And L Microwave Inc with CAGE code 50140. This part is registered under NSN 5915-01-273-5331, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-273-5331, NCB code 01 (origin: USA), and INC 00209. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 4C40-465 5-0 0 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4C40-465 5-0 0

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 4C40-465 5-0 0, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 4C40-465 5-0 0 with NSN 5915-01-273-5331, 5915012735331

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-01-273-5331

Item PartTypeName:

FILTER,BAND PASS

59150127353310P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
4C40-465/5-0/0523

Characteristics Data of NSN 5915-01-273-5331, 5915012735331

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH5.510 INCHES NOMINAL
ADAQBODY LENGTH4.750 INCHES NOMINAL
ADATBODY WIDTH1.120 INCHES NOMINAL
ADAUBODY HEIGHT2.880 INCHES NOMINAL
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.160 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH4.370 INCHES NOMINAL
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.750 INCHES NOMINAL
AFGAOPERATING TEMP RANGE-20.0 TO 50.0 DEG CELSIUS
AHAJREFERENCE FREQUENCY PER FUNCTION465.0 MEGAHERTZ BLANK
AHAQSOURCE IMPEDANCE RATING PER FUNCTION50.0 OHMS BLANK
AHASLOAD IMPEDANCE PER FUNCTION50.0 OHMS BLANK
AHBNINPUT TERMINAL MANUFACTURER CODE50140
AHBPINPUT TERMINAL IDENTIFICATIONSMA-JACK
AHBSOUTPUT TERMINAL MANUFACTURER CODE50140
AHBTOUTPUT TERMINAL IDENTIFICATIONSMA-JACK
AHBZVOLTAGE STANDING WAVE RATIO PER FUNCTION1.5 BLANK
AHCHAVERAGE POWER RATING PER FUNCTION15.0 WATTS BLANK
AKNAINCLOSURE TYPEENCASED
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS3.0 BLANK
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE INPUT 1ST FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 CONNECTOR,RECEPTACLE OUTPUT 2ND FUNCTION
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION460.00 MEGAHERTZ BLANK AND 462.50 MEGAHERTZ BLANK AND 467.50 MEGAHERTZ BLANK AND 470.00 MEGAHERTZ BLANK
CQRGBODY MATERIALALUMINUM
CRBBFREQUENCY BAND WIDTH PER FUNCTION462.50 MEGAHERTZ BLANK AND 467.50 MEGAHERTZ BLANK
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS50.0 MINIMUM BLANK AND 3.0 MAXIMUM BLANK 1ST FUNCTION
CRBNVOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION462.5 MEGAHERTZ BLANK AND 467.5 MEGAHERTZ BLANK
CRSTBODY SURFACE TREATMENTTIN
STYLSTYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL 9b-----
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061990 - Electrical equip: filters
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 593 - Motors and parts, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top