Buy 138C185H02 Transf Pul part by Kampi Components Co Inc

Part Number: 138C185H02

Manufacturer: kampi components co inc

NSN: 5950-01-148-2295

NIIN: 011482295

Item Name : transf pul

CAGE Code: 7Z016

INC Code: 77777

Country: USA

NCB Code: 01

We've received your request for 138C185H02 (described as Transf Pul), manufactured by Kampi Components Co Inc with CAGE code 7Z016. This part is registered under NSN 5950-01-148-2295, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-148-2295, NCB code 01 (origin: USA), and INC 77777. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 138C185H02 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 138C185H02

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 138C185H02, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 138C185H02 with NSN 5950-01-148-2295, 5950011482295

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5950-01-148-2295 Item PartTypeName: TRANSF PUL	5950	011482295	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
138C185H02	5	9	3

Characteristics Data of NSN 5950-01-148-2295, 5950011482295

MRC	Criteria	Characteristic
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	TRANSFORMER,PULSE
FEAT	SPECIAL FEATURES	PULSE TRANSFORMER IS DESIGNED FOR INTERMEDIATE PULSE LEVELS OF 100 TO 2,000 VOLTS AND WITH DC WINDING INSULATIONS SUITABLE FOR COUPLING BETWEEN CIRCUITS OF HIGH POTENTIAL DIFFERENCE
SPCL	SPECIAL TEST FEATURES	TURNS RATIO: 1:1; PRIMARY SINE WAVE OCL MH MINIMUM: 0.6; PRIMARY ET-CONSTANT: 1000 (V MINIMUM); RISE TIME (N5 MAX): 20; PRI/SEC CW/H (PF MAXIMUM): 65; PRI/SEC LEAKAGE INDUCTANCE (AAH MAXIMUM): 3.0; PRIMARY DCR (OHMS MAXIMUM): 0.15; SECONDAR
SUPP	SUPPLEMENTARY FEATURES	RATINGS: PEAK POWER: 25KW; AVERAGE POWER: 25 WATTS; PEAK PULSE VOLTAGE: 2KV; DC ISOLATION PRIMARY TO SECONDARY SHALL BE 5KV MINIMUM; PARTS SHALL WITHSTAND THE FOLLOWING HIGH POTENTIAL TEST WITHOUT ELECTRICAL DAMAGE,ARCING OR FLASHOVER: SEC
TEXT	GENERAL CHARACTERISTICS ITEM DESCRIPTION	PARTS SHALL MEET THE REQUIREMENTS OF MIL-T-21038,GRADE 5,CLASS S,LIFE X UNLESS OTHERWISE SPECIFIED ON DRAWING

Identification

HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.