We've received your request for T5709 (described as Transformer Power), manufactured by Kapital Magnetic Corp with CAGE code 07119. This part is registered under NSN 5950-00-410-7799, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5950 Coils and Transformers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-410-7799, NCB code 00 (origin: USA), and INC 32496. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your T5709 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.995 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 1.995 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 2.005 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP2.005 INCHES MAXIMUM SINGLE MOUNTIN |
| ACZB | FREQUENCY RATING | 47.5 HERTZ MINIMUM SINGLE COMPONENT AND 47.5 HERTZ MINIMUM SINGLE COMPONENT AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT420.0 HERTZ MAXIMUM SINGLE COMPONENT |
| ACZX | WINDING SHIELDING METHOD | INTERNAL SHIELD GROUNDED TO SECONDARY CENTER TAP SINGLE COMPONENTINTERNAL SHIELD GROUNDED TO SECONDARY CENTER TAP SINGLE COMPONENT |
| ADAU | BODY HEIGHT | 2.250 INCHES MAXIMUM2.250 INCHES MAXIMUM |
| AKNA | INCLOSURE TYPE | FULLY INCLOSEDFULLY INCLOSED |
| AXGY | MOUNTING METHOD | THREADED HOLE SINGLE GROUPTHREADED HOLE SINGLE GROUP |
| CQJX | NOMINAL THREAD SIZE | 0.164 INCHES SINGLE GROUP0.164 INCHES SINGLE GROUP |
| CWJS | WINDING OPERATING VOLTAGE | 115.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| THSD | THREAD SERIES DESIGNATOR | UNC SINGLE GROUP |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHEDNOT ESTABLISHED |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.182 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 2.182 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 2.192 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP2.192 INCHES MAXIMUM SINGLE MOUNTIN |
| ACZC | INPUT-OUTPUT PHASE RELATIONSHIP | SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENTSINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT |
| ADAQ | BODY LENGTH | 2.672 INCHES MINIMUM AND 2.672 INCHES MINIMUM AND 2.704 INCHES MAXIMUM2.704 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 2.484 INCHES MINIMUM AND 2.484 INCHES MINIMUM AND 2.516 INCHES MAXIMUM2.516 INCHES MAXIMUM |
| AEHZ | MAXIMUM OPERATING TEMP | 130.0 DEG CELSIUS130.0 DEG CELSIUS |
| AKPV | MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP4 SINGLE GROUP |
| BPLC | WINDING FUNCTION AND QUANTITY | 1 PRIMARY SINGLE COMPONENT AND 1 PRIMARY SINGLE COMPONENT AND 1 SECONDARY SINGLE COMPONENT1 SECONDARY SINGLE COMPONENT |
| CRBZ | WINDING OPERATING CURRENT | 1.0 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE SECONDARY |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 063420 - Transformers, noi, or transformer par |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 595 - Transformer, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
