Buy 121C Generator Sweep part by Kay Elemetrics Corporation

Part Number:  121C
Manufacturer:  kay elemetrics corporation
NIIN:  009557689
Item Name :  generator sweep
CAGE Code:  80138
INC Code:  00413
Country:  USA
NCB Code:  00
FSG:  66 Instruments And Laboratory Equipment

We've received your request for 121C (described as Generator Sweep), manufactured by Kay Elemetrics Corporation with CAGE code 80138. This part is registered under NSN 6625-00-955-7689, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 00-955-7689, NCB code 00 (origin: USA), and INC 00413. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 121C requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 121C

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 121C, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-00-955-7689, 6625009557689

MRCCriteriaCharacteristic
AFGAOPERATING TEMP RANGENOT RATED
AGTABASIC SHAPE STYLEIRREGULAR
BHTWPULSE PEAK AMPLITUDE PER CHANNEL448.000 MILLIVOLTS OUTPUT CHANNEL
BJBMMAXIMUM CONTINUOUS OPERATING TIME IN HOURSNOT RATED
FAAZPHASESINGLE
SR-5MANUFACTURERS CODE80138
BJBQOPERATING AC FREQUENCY IN HERTZ50.0 MINIMUM SINGLE VOLTAGE 60.0 MAXIMUM SINGLE VOLTAGE
SR-5THE MANUFACTURERS DATA
AFSUAVERAGE LIFE MEASUREMENTNOT RATED
AFDPSHOCK RESISTANCE RATING IN GRAVITATIONAL UNITSNOT RATED
SR-5DESIGN CONTROL REFERENCE121CFE
FEATSPECIAL FEATURESINCLUDES DETECTOR,PART NO. 999A,PLUG-IN UNIT,PART NO. 122FA1,MARKERS AT 1,10,62.1,63,63.9 AND 100 MC
AKAEMAXIMUM OPERATING ALTITUDE RATINGNOT RATED
BHTKSIGNAL VOLTAGE RATING PER CHANNELNOT RATED
BHTLOVERALL GAINNOT RATED
BJBJOUTPUT WAVE SHAPECOSINE
ABHPOVERALL LENGTH20.000 INCHES NOMINAL
BHTTPULSE REPETITION RATE PER CHANNEL10.000 PULSES PER SECOND MINIMUM OPERATING CHANNEL 60.000 PULSES PER SECOND MAXIMUM OPERATING CHANNEL
BHTBFREQUENCY PER CHANNEL1.0 MEGAHERTZ MINIMUM OPERATING CHANNEL 1.4 GIGAHERTZ MAXIMUM OPERATING CHANNEL
ABKWOVERALL HEIGHT11.000 INCHES NOMINAL
ABMKOVERALL WIDTH14.000 INCHES NOMINAL
AECRVIBRATION RESISTANCE RANGE IN HERTZNOT RATED
BHTHATTENUATION IN DECIBELSNOT RATED
BHTJAVERAGE POWER RATING PER CHANNELNOT RATED
BKFCEXTERNAL AC OPERATING VOLTAGE IN VOLTS117.0 MINIMUM SINGLE VOLTAGE 230.0 MAXIMUM SINGLE VOLTAGE
BHTNIMPEDANCE RATING PER CHANNEL50.000 OHMS OUTPUT CHANNEL

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL --yrh-x
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Flz
Unit of Measure Ea

Freight Information

ACC: A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: Q - High sensitivity, category ii, aa&e, classified confidential
TCC: Z - No special type of cargo code applicable
WCC: 653 - Musical instruments

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top