Buy RL1215-3-3K89S4 Resistor Thermal part by Keystone Carbon Co Inc

Part Number:  RL1215-3-3K89S4
Alternate P/N:  RL121533K89S4
Manufacturer:  keystone carbon co inc
NIIN:  007637638
Item Name :  resistor thermal
CAGE Code:  75263
INC Code:  00309
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for RL1215-3-3K89S4 (described as Resistor Thermal), manufactured by Keystone Carbon Co Inc with CAGE code 75263. This part is registered under NSN 5905-00-763-7638, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 00-763-7638, NCB code 00 (origin: USA), and INC 00309. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your RL1215-3-3K89S4 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RL1215-3-3K89S4

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part RL1215-3-3K89S4, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number RL1215-3-3K89S4 with NSN 5905-00-763-7638, 5905007637638

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-763-7638

Item PartTypeName:

RESISTOR,THERMAL

5905007637638N
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
2088175-0014695

Characteristics Data of NSN 5905-00-763-7638, 5905007637638

MRCCriteriaCharacteristic
ADATBODY WIDTH0.280 INCHES NOMINAL
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER-21.5 DEG CELSIUS 3RD RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP1.729 KILOHMS 6TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP178.5 KILOHMS 2ND RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP3.3 KILOHMS 5TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP371.0 OHMS 9TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP510.0 KILOHMS 1ST RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP881.0 OHMS 7TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-13.0 TO 13.0 6TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-15.0 TO 15.0 4TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-15.0 TO 15.0 7TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-18.0 TO 18.0 8TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-20.0 TO 20.0 3RD RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-30.0 TO 30.0 1ST RESISTANCE-TEMPERATURE POINT
AKNAINCLOSURE TYPEENCAPSULATED
STYLSTYLE DESIGNATORDISK
TTQYTERMINAL TYPE AND QUANTITY2 WIRE LEAD
AARGRELIABILITY INDICATORNOT ESTABLISHED
ABJTTERMINAL LENGTH1.500 INCHES MINIMUM
ADARBODY OUTSIDE DIAMETER0.180 INCHES NOMINAL
AEHYAMBIENT TEMP AT FULL RATED POWER25.0 DEG CELSIUS
AEHZMAXIMUM OPERATING TEMP150.0 DEG CELSIUS
AEJBPOWER DISSIPATION CONSTANT IN MILLIWATTS PER DEG CELSIUS7.7
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER-40.0 DEG CELSIUS 2ND RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER-55.0 DEG CELSIUS 1ST RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER104.4 DEG CELSIUS 9TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER25.0 DEG CELSIUS 4TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER37.8 DEG CELSIUS 5TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER55.0 DEG CELSIUS 6TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER75.0 DEG CELSIUS 7TH RESISTANCE-TEMPERATURE POINT
AEJDTEMP POINTS FOR RESISTANCE READINGS AT ZERO POWER90.0 DEG CELSIUS 8TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP5.58 KILOHMS 4TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP557.0 OHMS 8TH RESISTANCE-TEMPERATURE POINT
AEJEZERO POWER RESISTANCE AT SPECIFIED TEMP56.8 KILOHMS 3RD RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-10.0 TO 10.0 5TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-20.0 TO 20.0 9TH RESISTANCE-TEMPERATURE POINT
AEJFRESISTANCE TOLERANCE AT A SPECIFIED TEMP IN PERCENT-27.0 TO 27.0 2ND RESISTANCE-TEMPERATURE POINT
CQWDZERO POWER RESISTANCE5.580 KILOHMS
CRQJZERO POWER RESISTANCE TOLERANCE IN PERCENT AT REFERENCE TEMP-15.0 TO 15.0

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533400080 (NAICS 334416) Variable resistors, including potentiometers, nesoi
SITC : 77235 Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC U - Precious metal content is unknown

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 658 - Electrical appliances, small

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top