Buy CO-0809 Clamp Loop part by Kickhaefer Manufacturing Company

Part Number: CO-0809

Alternate P/N: CO0809

Manufacturer: kickhaefer manufacturing company

NSN: 5340-01-590-3818

NIIN: 015903818

Item Name : clamp loop

CAGE Code: 75272

FSC: 5340 Hardware Commercial

INC Code: 17532

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for CO-0809 (described as Clamp Loop), manufactured by Kickhaefer Manufacturing Company with CAGE code 75272. This part is registered under NSN 5340-01-590-3818, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 01-590-3818, NCB code 01 (origin: USA), and INC 17532. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CO-0809 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CO-0809

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CO-0809, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CO-0809 with NSN 5340-01-590-3818, 5340015903818

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-590-3818 Item PartTypeName: CLAMP,LOOP	5340	015903818	0	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CO-0809	5	9	D

Characteristics Data of NSN 5340-01-590-3818, 5340015903818

MRC	Criteria	Characteristic
ABGD	SLOT LENGTH	0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.017 INCHES MINIMUM AND 0.047 INCHES MAXIMUM
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	CO-COV CLIPS
MATT	MATERIAL	PLASTIC VINYL CUSHION
ABMK	OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
AJRB	MATERIAL DIAMETER	0.017 INCHES MINIMUM AND 0.047 INCHES MAXIMUM
AZDC	DISTANCE FROM LOOP CENTER TO TONGUE END	0.901 INCHES MINIMUM AND 0.983 INCHES MAXIMUM
STYL	STYLE DESIGNATOR	SINGLE LOOP
ABGC	SLOT WIDTH	0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM
AAAL	TONGUE HOLE TYPE	OBLONG
AGAV	END ITEM IDENTIFICATION	6115-01-561-7788 GENERATOR SET, DIESEL ENGINE
AZCY	CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
BZTN	LOOP INSIDE DIAMETER	0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD	A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	No qup
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	095190 - Hardware, noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware