Buy R36-103C4-0-732 Resistor Variable N part by L 3 Communications Corporation

Part Number: R36-103C4-0-732

Alternate P/N: R36103C40732

Manufacturer: l 3 communications corporation

NSN: 5905-00-917-4151

NIIN: 009174151

Item Name : resistor variable n

CAGE Code: 1PQF4

INC Code: 37407

Country: USA

NCB Code: 00

We've received your request for R36-103C4-0-732 (described as Resistor Variable N), manufactured by L 3 Communications Corporation with CAGE code 1PQF4. This part is registered under NSN 5905-00-917-4151, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-917-4151, NCB code 00 (origin: USA), and INC 37407. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your R36-103C4-0-732 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for R36-103C4-0-732

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part R36-103C4-0-732, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number R36-103C4-0-732 with NSN 5905-00-917-4151, 5905009174151

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5905-00-917-4151 Item Description: Resistor Variable N	5905	009174151	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
R36-103c4-0-732		9	5

Characteristics Data of NSN 5905-00-917-4151, 5905009174151

MRC	Criteria	Characteristic
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AAVL	PILOT DIAMETER	1.3120 INCHES MINIMUM AND 1.3125 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	1.312 INCHES NOMINAL
ABPC	UNDERCUT WIDTH	0.0730 INCHES NOMINAL
ABXF	SHAFT LENGTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
ADAV	OVERALL DIAMETER	1.442 INCHES NOMINAL
AEDA	MOUNTING LIP DEPTH	0.0930 INCHES NOMINAL
AEDZ	SHAFT BEARING TYPE	BALL
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFY	SHAFT END PLAY	0.005 INCHES
AEFZ	SHAFT RUNOUT	0.001 INCHES
AEGB	PILOT DIAMETER RUNOUT	0.00200 INCHES
AXGY	MOUNTING METHOD	CLAMP RING
CQCC	ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS ALL SECTIONS
CQFL	FUNCTION CONFORMITY TOLERANCE PER SECTION	0.50/+0.50 SINGLE SECTION
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 SINGLE SECTION
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	200.0/+200.0 SINGLE SECTION
CRGD	POWER DISSIPATION RATING PER SECTION IN WATTS	2.0 FREE AIR SINGLE SECTION
CRSS	RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0/+10.0 ALL SECTIONS
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CONTINUOUS MOTION
CSDH	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	25.0 SINGLE SECTION
AAPN	SECTION QUANTITY	3
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
AAVM	PILOT LENGTH	0.0620 INCHES NOMINAL
ABHP	OVERALL LENGTH	1.099 INCHES MINIMUM AND 1.161 INCHES MAXIMUM
ABPM	BODY DIAMETER	1.442 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.250 INCHES NOMINAL
ADAQ	BODY LENGTH	0.630 INCHES NOMINAL
AECZ	MOUNTING LIP DIAMETER	1.4370 INCHES NOMINAL
AEDX	SHAFT STYLE	ROUND
AEFH	EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	340.0 NOMINAL
AEFK	MAXIMUM STARTING TORQUE	0.50 INCH-OUNCES
AEGA	LATERAL RUNOUT	0.002 INCHES
AEGC	SHAFT RADIAL PLAY	0.001 INCHES
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
CQCK	ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	360.0 NOMINAL
CRGM	FUNCTION CONFORMITY PER SECTION	SINGLE SECTION INDEPENDENT LINEARITY
CSBX	FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
TTQY	TERMINAL TYPE AND QUANTITY	12 TAB, SOLDER LUG

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8533400080 (NAICS 334416)	Variable resistors, including potentiometers, nesoi
SITC : 77235	Variable electrical resistors (including reostats and potentiometers), n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	V
Classification Control	U
MGMT_CTL	9n--00-
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	S9e
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	062960 - Reostats/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72D - Communications/electronics, other than sigint/ew or comsec repair parts and components