Buy LAG-126 Generator Signal part by Leader Instruments Corporation

Part Number: LAG-126

Alternate P/N: LAG126

Manufacturer: leader instruments corporation

NSN: 6625-01-370-6698

NIIN: 013706698

Item Name : generator signal

CAGE Code: 53714

FSC: 6625 Electrical and Electronic Properties Measuring and Testing Instruments

INC Code: 03901

Country: USA

NCB Code: 01

FSG: 66 Instruments And Laboratory Equipment

We've received your request for LAG-126 (described as Generator Signal), manufactured by Leader Instruments Corporation with CAGE code 53714. This part is registered under NSN 6625-01-370-6698, classified in FSG 66 Instruments And Laboratory Equipment / FSC 6625 Electrical and Electronic Properties Measuring and Testing Instruments. Our verification process will confirm traceability through supporting identifiers including NIIN 01-370-6698, NCB code 01 (origin: USA), and INC 03901. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your LAG-126 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LAG-126

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part LAG-126, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-370-6698, 6625013706698

MRC	Criteria	Characteristic
AFHS	ACCESSORY COMPONENT QUANTITY	1
ABKW	OVERALL HEIGHT	7.875 INCHES NOMINAL
ABMK	OVERALL WIDTH	6.000 INCHES NOMINAL
BHFZ	CALIBRATED SIGNAL OUTPUT RANGE	SINEWAVE OUTPUT LEVEL 3VRMS P10DBV AND P 12DBM; SQUARE OUTPUT LEVEL 4V WITH OUTPUT SET FOR DBV
AFGQ	FREQUENCY RANGE RATING	5.000 TO 999.999 HERTZ AND 0.001 TO 500.000 KILOHERTZ
AZCG	ACCESSORY COMPONENT NAME	BNC TO ALLIGATOR CLIP CABLE
AMSE	VOLTAGE RATING	100.0 VOLTS MINIMUM AND 240.0 VOLTS MAXIMUM
ACZB	FREQUENCY RATING	50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
SR-5	DESIGN CONTROL REFERENCE	LAG-126
SR-5	THE MANUFACTURERS DATA
ANLC	FREQUENCY BAND QUANTITY	5
SUPP	III SUPPLEMENTARY FEATURES	OUTPUT ATTENUATOR PROVIDES UP TO 69.9 DB OF ATTENUATION IN 0.1 DB STEPS,PORM 0.1 DB CONTINUOUSLY VARIABLE CONTROL PROVIDED; VERNIER ACTION DIAL,OUTPUT ON/OFF SWITCH FOR S/N AND CROSSOVER MEASUREMENTS; SINE WAVE DISTORTION LESS THAN .005 THROUGH 20 KHZ
BDHW	CALIBRATION ACCURACY RATING	PLUS 3 PCT ACCURACY RATING
ABHP	OVERALL LENGTH	9.875 INCHES NOMINAL
SR-5	MANUFACTURERS CODE	53714
AMNE	OUTPUT IMPEDANCE RATING	600.0 OHMS NOMINAL

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8543200000 (NAICS 334515)	Signal generators
SITC : 77878	Electrical machines and apparatus, having individual functions, n.E.S. (other than particle accelerators)

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	A - Item does not contain precious metal.