Buy LDC-824S Counter Electronic part by Leader Instruments Corporation

Part Number:  LDC-824S
Alternate P/N:  LDC824S
NIIN:  012926734
Item Name :  counter electronic
CAGE Code:  53714
INC Code:  26835
Country:  USA
NCB Code:  01

We've received your request for LDC-824S (described as Counter Electronic), manufactured by Leader Instruments Corporation with CAGE code 53714. This part is registered under NSN 6625-01-292-6734, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-292-6734, NCB code 01 (origin: USA), and INC 26835. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your LDC-824S requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LDC-824S

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part LDC-824S, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

Characteristics Data of NSN 6625-01-292-6734, 6625012926734

MRCCriteriaCharacteristic
FAAZPHASETHREE
BFQMINTERNAL CALIBRATION FEATURENOT INCLUDED
AFHSACCESSORY COMPONENT QUANTITY2
BFQQDISPLAY UNITS INDICATORNOT INCLUDED
BFQTREMOTE CONTROL PROVISIONSNOT INCLUDED
ABKWOVERALL HEIGHT3.000 INCHES NOMINAL
ALSFINTERNAL BATTERY ACCOMMODATIONNOT INCLUDED
AGBDELECTRICAL CONNECTION TYPECONNECTOR PLUG
AMSEVOLTAGE RATING100.0 VOLTS NOMINAL OR 120.0 VOLTS NOMINAL OR 200.0 VOLTS NOMINAL OR 220.0 VOLTS NOMINAL OR 240.0 VOLTS NOMINAL
AZCGACCESSORY COMPONENT NAMETEST LEAD
ABJLWATTAGE RATING IN WATTS10.0
SUPPIII SUPPLEMENTARY FEATURES1 PPM STANDARD TIME BASE ACCURACY
BFHZMEASUREMENT TYPEFREQUENCY
BFQRDISPLAY POSITIONED DECIMAL POINTPROVIDED
AWJNIII UNPACKAGED UNIT WEIGHT6.000 POUNDS
FEATSPECIAL FEATURESCOUNTER RESOLUTION 0.1 TO 100 HZ DEPENDENT UPON FREQ RANGE,GATE TIME AND NO. OF DIGITS ON DISPLAY
BFQXINCLOSURE MATERIAL AND LOCATIONMETAL CASE
AKVYACCESSORY CONTROLLING AGENCYLEADER INSTRUMENTS CORPORATION
BFJCACCURACY RATINGPORM 1 COUNT PORM TIME BASE ACCURACY
BFJBFREQUENCY RANGE0.00001 TO 520.00000 MEGAHERTZ OVERALL
BFQPDISPLAY DIGIT QUANTITY8
AXGYMOUNTING METHODBENCH
ABHPOVERALL LENGTH10.000 INCHES NOMINAL
BFQSDISPLAY STORAGE FACILITYNOT INCLUDED
BFQWSOLID STATE FEATUREINCLUDED
BFQZPLUG-IN UNITS PROVISIONNOT INCLUDED
BFRBSTANDARD FREQUENCY OUTPUT FEATURENOT INCLUDED
ACZBFREQUENCY RATING50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
ACDCCURRENT TYPEAC
ASKXELECTRICAL CONNECTION QUANTITY1
ABMKOVERALL WIDTH8.000 INCHES NOMINAL
BFQNDISPLAY TYPEVACUUM FLUORESCENT
BFJFGATE TIME0.1 SECONDS NOMINAL AND 1.0 SECONDS NOMINAL AND 10.0 SECONDS NOMINAL

Schedule B & Trade

End Use : 21160 Measuring, testing, control instruments
Schedule B : 9030908030 (NAICS 334515) Parts and accessories of articles of schedule b subheading 9030.39
SITC : 87479 Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL Sf9tg-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: J - 100.0
NMFC: 061620 - Electric current testers
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top