We've received your request for 2586364 (described as Synchro Control Tra), manufactured by Lockheed Martin Corporation with CAGE code 56232. This part is registered under NSN 5990-00-782-0112, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-782-0112, NCB code 00 (origin: USA), and INC 15289. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 2586364 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-782-0112 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 007820112 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10-CT-304-A-62B | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.2300 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSP | STATOR INPUT CURRENT RATING | 21.0 MILLIAMPERES NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 50.0 MILLIWATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 800.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 0.03 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -12.0 TO 12.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWS | GEAR OUTSIDE DIAMETER | 1.7073 INCHES MINIMUM AND 1.7083 INCHES MAXIMUM |
| ALNF | SHAFT HOLE DIAMETER | 0.0600 INCHES NOMINAL SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 2.302 ROTOR TO STATOR MINIMUM |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| CWAC | SHAFT TAPER LENGTH | 0.1250 INCHES NOMINAL SINGLE SHAFT |
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.5110 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0940 INCHES NOMINAL SINGLE SHAFT |
| AJSL | BODY SIZE | 10 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 115.00 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 890.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 560.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 560.00 NOMINAL |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.0 CENTIMETER-GRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWT | GEAR THICKNESS | 0.1250 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2810 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 2900.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 470.00 NOMINAL |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | 0.0775 INCHES NOMINAL SINGLE SHAFT |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 350.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,TAPERED,HOLLOWED SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.0500 INCHES NOMINAL |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| End Use : 22220 | Marine engines, parts |
|---|---|
| Schedule B : 9014900000 (NAICS 334511) | Parts & accessories for direction finding compasses and other navigational instruments and appliances |
| SITC : 87412 | Parts and accessories of navigational instruments and appliances |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | D |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 062120 - Generators/motors/parts noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 593 - Motors and parts, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
