Buy CDN10AS1 Synchro Differentia part by Lockheed Martin Corporation

Part Number: CDN10AS1

Manufacturer: lockheed martin corporation

NSN: 5990-00-904-7315

NIIN: 009047315

Item Name : synchro differentia

CAGE Code: 56232

INC Code: 02071

Country: USA

NCB Code: 00

We've received your request for CDN10AS1 (described as Synchro Differentia), manufactured by Lockheed Martin Corporation with CAGE code 56232. This part is registered under NSN 5990-00-904-7315, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 00-904-7315, NCB code 00 (origin: USA), and INC 02071. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CDN10AS1 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CDN10AS1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CDN10AS1, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CDN10AS1 with NSN 5990-00-904-7315, 5990009047315

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5990-00-904-7315 Item PartTypeName: SYNCHRO,DIFFERENTIAL TRANSMITTER	5990	009047315	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	7			U	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2325877	3	2	3

Characteristics Data of NSN 5990-00-904-7315, 5990009047315

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STANDARD ROUND B
AAVH	SHOULDER DIAMETER	0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM
AAVL	PILOT DIAMETER	0.5000 INCHES MINIMUM AND 0.5005 INCHES MAXIMUM
ABHP	OVERALL LENGTH	1.6650 INCHES MAXIMUM
ABKK	FLANGE DIAMETER	0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.0580 INCHES MINIMUM AND 0.0680 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT
ABXF	SHAFT LENGTH	0.3370 INCHES NOMINAL SINGLE SHAFT
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AJSL	BODY SIZE	10
AJSN	STATOR INPUT VOLTAGE RATING IN VOLTS	11.8 NOMINAL
AJSP	STATOR INPUT CURRENT RATING	100.0 MILLIAMPERES NOMINAL
AJSQ	STATOR INPUT ELECTRICAL POWER RATING	250.0 MILLIWATTS NOMINAL
AJSS	FREQUENCY IN HERTZ	400.0 NOMINAL
AJSW	ZRO RESISTANCE IN OHMS	28.90 MINIMUM AND 39.10 MAXIMUM
AJTS	ROTOR DC RESISTANCE IN OHMS	28.80 MINIMUM AND 35.20 MAXIMUM
AJTT	STATOR DC RESISTANCE IN OHMS	22.50 MINIMUM AND 27.50 MAXIMUM
AJVF	PHASE SHIFT ANGLE IN DEG	10.200 OUTPUT TO INPUT MAXIMUM
AJVG	MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	60.00 OUTPUT
AJVS	ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS	9.00 CENTIMETER-GRAMS MAXIMUM
AJVT	ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS	3.00 CENTIMETER-GRAMS MAXIMUM
AJWQ	PILOT LENGTH	0.0350 INCHES MINIMUM AND 0.0450 INCHES MAXIMUM
AJWR	SHOULDER LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AJWX	MOUNTING SURFACE TO TERMINAL END DISTANCE	1.1900 INCHES MAXIMUM
AJXB	SHAFT MAXIMUM RUNOUT	0.0010 INCHES
CQRG	BODY MATERIAL	STEEL CORROSION RESISTING
CQTM	TERMINAL LOCATION	REAR
CQXQ	PLUS J ZRO REACTANCE IN OHMS	107.10 MINIMUM AND 130.90 MAXIMUM
CQZS	SHAFT SLOT DEPTH	0.1880 INCHES NOMINAL SINGLE SHAFT
CRHN	SHAFT SLOT WIDTH	0.1250 INCHES NOMINAL SINGLE SHAFT
CRSJ	SHAFT TYPE	ROUND,SLOTTED SINGLE SHAFT
CSJY	TRANSFORMATION RATIO	1.028 ROTOR TO STATOR MINIMUM AND 1.090 ROTOR TO STATOR MAXIMUM
TEST	TEST DATA DOCUMENT	10001-2325877 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW
TTQY	TERMINAL TYPE AND QUANTITY	6 WIRE LEAD

Schedule B & Trade

End Use : 22220	Marine engines, parts
Schedule B : 9014900000 (NAICS 334511)	Parts & accessories for direction finding compasses and other navigational instruments and appliances
SITC : 87412	Parts and accessories of navigational instruments and appliances

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	7
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	062120 - Generators/motors/parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)