Buy LS1-12-20 Clamp Block part by Lockheed Martin Corporation

Part Number: LS1-12-20

Alternate P/N: LS11220

Manufacturer: lockheed martin corporation

NSN: 5340-01-010-2151

NIIN: 010102151

Item Name : clamp block

CAGE Code: 98897

INC Code: 37415

Country: USA

NCB Code: 01

We've received your request for LS1-12-20 (described as Clamp Block), manufactured by Lockheed Martin Corporation with CAGE code 98897. This part is registered under NSN 5340-01-010-2151, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-010-2151, NCB code 01 (origin: USA), and INC 37415. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your LS1-12-20 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for LS1-12-20

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part LS1-12-20, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number LS1-12-20 with NSN 5340-01-010-2151, 5340010102151

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-010-2151 Item PartTypeName: CLAMP,BLOCK	5340	010102151	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
LS1-12-20	5	2	3

Characteristics Data of NSN 5340-01-010-2151, 5340010102151

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	3.120 INCHES NOMINAL
ABKW	OVERALL HEIGHT	1.750 INCHES NOMINAL
ABMK	OVERALL WIDTH	0.500 INCHES NOMINAL
ABTB	MOUNTING HOLE DIAMETER	0.210 INCHES NOMINAL
ABTJ	MOUNTING HOLE QUANTITY	1
AFEC	DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH	0.250 INCHES NOMINAL
AZGM	MOUNTING FACILITY	UNTHREADED HOLE
BYGG	BLOCK HEIGHT	0.845 INCHES NOMINAL
CWTD	CLAMPING HOLE QUANTITY	2
CWWM	CLAMPING HOLE DIAMETER	0.750 INCHES NOMINAL FIRST HOLE
CWWM	CLAMPING HOLE DIAMETER	1.250 INCHES NOMINAL SECOND HOLE
CWXC	DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER	1.560 INCHES NOMINAL
CWXN	DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER	0.625 INCHES NOMINAL
CWXZ	CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES	1.620 INCHES NOMINAL
MATT	MATERIAL	WOOD
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MM-L-736 FED SPEC 1ST MATERIAL RESPONSE AND AMS 3208 ASSN STD 2ND MATERIAL RESPONSE
STYL	STYLE DESIGNATOR	RECTANGULAR

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	J
Classification Control	U
MGMT_CTL	Sf9sx-n
Quantity per pack	10
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	J - 100.0
NMFC:	199970 - Woodenware sub6
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	772 - Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc