Buy R-10N-1000D Resistor Fixed Wire part by Microohm Corporation

Part Number:  R-10N-1000D
Alternate P/N:  R10N1000D
Manufacturer:  microohm corporation
NIIN:  014454468
Item Name :  resistor fixed wire
CAGE Code:  20940
INC Code:  37404
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for R-10N-1000D (described as Resistor Fixed Wire), manufactured by Microohm Corporation with CAGE code 20940. This part is registered under NSN 5905-01-445-4468, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5905 Resistors. Our verification process will confirm traceability through supporting identifiers including NIIN 01-445-4468, NCB code 01 (origin: USA), and INC 37404. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your R-10N-1000D requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for R-10N-1000D

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part R-10N-1000D, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number R-10N-1000D with NSN 5905-01-445-4468, 5905014454468

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-01-445-4468

Item PartTypeName:

RESISTOR,FIXED,WIRE WOUND,NONIND

59050144544680NB
CIICHCCESDPMICCriticalityENAC
UBA0
Part NumberISCRNVCRNCCHCCMSDSSADC
0811-285958E

Characteristics Data of NSN 5905-01-445-4468, 5905014454468

MRCCriteriaCharacteristic
ABPMBODY DIAMETER0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
AAPPELECTRICAL RESISTANCE100.000 OHMS
AAQFAMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER25.0
AAQZINCLOSURE METHODENCAPSULATED
AARHRELIABILITY FAILURE RATE LEVEL IN PERCENT0.010
AAQGAMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER275
TESTTEST DATA DOCUMENT81349-MIL-R-39007 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
AARBTERMINAL TYPEWIRE LEAD
SR-1SPEC/STD CONTROLLING DATA
ADAQBODY LENGTH1.718 INCHES MINIMUM AND 1.842 INCHES MAXIMUM
AARGRELIABILITY INDICATORESTABLISHED
AEFBPOWER DISSIPATION RATING IN WATTS10.000 FREE AIR
AAPQRESISTANCE TOLERANCE IN PERCENT-0.500 TO 0.500
STYLSTYLE DESIGNATORAXIAL TERMINAL EACH END
SR-1NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-R-39007/7
SR-1MANUFACTURERS CODE81349
SR-1DEFINITIVE GOVERNMENT SPEC/STD REFERENCERWR78N1000DS
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-R-39007/7 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005 Electric apparatus
Schedule B : 8533390080 (NAICS 334416) Wirewound variable resistors, nesoi
SITC : 77233 Wirewound electrical variable resistors (including rheostats and potentiometers)

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC J
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 062960 - Reostats/parts noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top