Buy MS35308-426 Screw Cap Hexagon H part by Military Standards Corp

Part Number: MS35308-426

Alternate P/N: MS35308426

Manufacturer: military standards corp

NSN: 5305-00-451-5295

NIIN: 004515295

Item Name : screw cap hexagon h

CAGE Code: 96906

FSC: 5305 Screws

INC Code: 18257

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MS35308-426 (described as Screw Cap Hexagon H), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5305-00-451-5295, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 00-451-5295, NCB code 00 (origin: USA), and INC 18257. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS35308-426 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS35308-426

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS35308-426, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS35308-426 with NSN 5305-00-451-5295, 5305004515295

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-00-451-5295 Item PartTypeName: SCREW,CAP,HEXAGON HEAD	5305	004515295	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
FFS85	2	1	4

Characteristics Data of NSN 5305-00-451-5295, 5305004515295

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	1.438 INCHES MINIMUM
AASB	FASTENER LENGTH	4.656 INCHES MINIMUM AND 4.750 INCHES MAXIMUM
AASK	HEAD STYLE	HEXAGON
AASU	HEAD HEIGHT	0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
AATB	WIDTH BETWEEN FLATS	0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.500 INCHES
CMLP	THREAD QUANTITY PER INCH	20
CQBC	MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
CQFM	HARDNESS RATING	80.0 ROCKWELL B MINIMUM OVERALL
CQHQ	MINIMUM YIELD STRENGTH	30000 POUNDS PER SQUARE INCH
CSYM	SURFACE FINISH	63.0 MICROINCHES THREADS
MATT	MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 385 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL C
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNF
ZZZT	NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 10P STYLE

Schedule B & Trade

End Use : 12110	Iron and steel products, other
Schedule B : 7318152000 (NAICS 332722)	Bolts and bolts and their nuts or washers exported in the same shipment
SITC : 69421	Screws, bolts, nuts, screw hooks, rivets, washers and similar articles, threaded, of iron or steel

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	25
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	093486 - Bolts, nuts or screws, noi (sub 3)
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware