Buy MS24693-48 Screw Machine part by Military Standards Corp

Part Number: MS24693-48

Alternate P/N: MS2469348

Manufacturer: military standards corp

NSN: 5305-01-026-0798

NIIN: 010260798

Item Name : screw machine

CAGE Code: 96906

FSC: 5305 Screws

INC Code: 06657

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

We've received your request for MS24693-48 (described as Screw Machine), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5305-01-026-0798, classified in FSG 53 Hardware and Abrasives / FSC 5305 Screws. Our verification process will confirm traceability through supporting identifiers including NIIN 01-026-0798, NCB code 01 (origin: USA), and INC 06657. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS24693-48 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS24693-48

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS24693-48, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS24693-48 with NSN 5305-01-026-0798, 5305010260798

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-026-0798 Item PartTypeName: SCREW,MACHINE	5305	010260798	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
FF-S-92	5	1	4

Characteristics Data of NSN 5305-01-026-0798, 5305010260798

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.210 INCHES MINIMUM AND 0.303 INCHES MAXIMUM
AASB	FASTENER LENGTH	0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
AHYM	NOMINAL THREAD DIAMETER	0.164 INCHES
CMLP	THREAD QUANTITY PER INCH	32
CQBC	MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
CRSQ	COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
CYAU	SCREW MATERIAL	COPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 270 OR COPPER ALLOY 274 OR COPPER ALLOY 360
CYBA	SCREW SURFACE TREATMENT	OXIDE
CYBE	SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE
THSD	THREAD SERIES DESIGNATOR	UNC
ZZZT	NONDEFINITIVE SPEC/STD DATA	3 TYPE AND 3C STYLE

Schedule B & Trade

End Use : 12300	Finished metal shapes
Schedule B : 7415338550 (NAICS 332722)	Other copper screws (not for wood) bolts and nuts
SITC : 69433	Screws, bolts, nuts, washers and similar articles, threaded, of copper

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	T2200x-
Quantity per pack	100
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	Q - 70.0
NMFC:	096630 - Screws noi brass/bronze/copper
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	713 - Metal hardware