Buy MS21254-5RL Connector Rod End part by Military Standards Corp

Part Number: MS21254-5RL

Alternate P/N: MS212545RL

Manufacturer: military standards corp

NSN: 5340-00-069-0604

NIIN: 000690604

Item Name : connector rod end

CAGE Code: 96906

FSC: 5340 Hardware Commercial

INC Code: 03439

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

We've received your request for MS21254-5RL (described as Connector Rod End), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5340-00-069-0604, classified in FSG 53 Hardware and Abrasives / FSC 5340 Hardware Commercial. Our verification process will confirm traceability through supporting identifiers including NIIN 00-069-0604, NCB code 00 (origin: USA), and INC 03439. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS21254-5RL requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS21254-5RL

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS21254-5RL, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS21254-5RL with NSN 5340-00-069-0604, 5340000690604

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-00-069-0604 Item PartTypeName: CONNECTOR,ROD END	5340	000690604	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
2821975	2	9	5

Characteristics Data of NSN 5340-00-069-0604, 5340000690604

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A ROD CONNECTION
AAJF	THREAD DIRECTION	RIGHT-HAND ROD CONNECTION
AASA	THREAD LENGTH	0.578 INCHES MINIMUM AND 0.672 INCHES MAXIMUM ROD CONNECTION
ABGG	RADIUS	0.312 INCHES NOMINAL
AGGZ	SHANK OUTSIDE DIAMETER	0.250 INCHES NOMINAL
AHHE	TONGUE WIDTH	0.625 INCHES NOMINAL
AHHF	TONGUE THICKNESS	0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
ATCG	SHANK OVERALL LENGTH	2.113 INCHES NOMINAL
BFKT	DISTANCE FROM END TO HOLE CENTER	2.610 INCHES MINIMUM AND 2.656 INCHES MAXIMUM
CQJX	NOMINAL THREAD SIZE	0.250 INCHES ROD CONNECTION
MATT	MATERIAL	STEEL COMP 8630 OR STEEL COMP 4130 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CHROMIUM AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	CONNECTOR
THSD	THREAD SERIES DESIGNATOR	UNF ROD CONNECTION

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	D
Classification Control	U
MGMT_CTL	J2200x-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	011790 - Aircraft parts noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	671 - Aircraft parts, to include test/tool sets and equipment (other than armament systems)