Buy MS3119E12-3 Adapter Connector part by Military Standards Corp

Part Number: MS3119E12-3

Alternate P/N: MS3119E123

Manufacturer: military standards corp

NSN: 5935-00-994-2565

NIIN: 009942565

Item Name : adapter connector

CAGE Code: 96906

FSC: 5935 Connectors Electrical

INC Code: 15091

Country: USA

NCB Code: 00

FSG: 59 Electrical and Electronic Equipment Components

We've received your request for MS3119E12-3 (described as Adapter Connector), manufactured by Military Standards Corp with CAGE code 96906. This part is registered under NSN 5935-00-994-2565, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5935 Connectors Electrical. Our verification process will confirm traceability through supporting identifiers including NIIN 00-994-2565, NCB code 00 (origin: USA), and INC 15091. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your MS3119E12-3 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for MS3119E12-3

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part MS3119E12-3, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number MS3119E12-3 with NSN 5935-00-994-2565, 5935009942565

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5935-00-994-2565 Item PartTypeName: ADAPTER,CONNECTOR	5935	009942565	0	P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
632614-21	5	1	5

Characteristics Data of NSN 5935-00-994-2565, 5935009942565

MRC	Criteria	Characteristic
AAQL	BODY STYLE	STRAIGHT SHAPE W/FLANGE
ABHP	OVERALL LENGTH	1.125 INCHES MAXIMUM
ABKW	OVERALL HEIGHT	1.047 INCHES MAXIMUM
ABMK	OVERALL WIDTH	1.047 INCHES MAXIMUM
ADZC	ENVIRONMENTAL PROTECTION	MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
AEBV	UNTHREADED MOUNTING HOLE DIAMETER	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
AEBW	CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.812 INCHES NOMINAL
AEHA	DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.812 INCHES NOMINAL
AFQK	DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
AFQW	MATING END QUANTITY	2
AFQX	CONTACT POSITION ARRANGEMENT STYLE	12-3 ALL MATING ENDS
AFQZ	CONTACT REMOVABILITY	NONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
AFRD	CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	600.0 ALL MATING ENDS ALL CONTACT GROUPINGS
AFRN	POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
AFRP	INSERT POSITION IN DEG	0.0
AFRT	SHELL TYPE	SOLID
AFRV	CONNECTOR LOCKING METHOD	BAYONET PIN
CQYH	CONTACT SURFACE TREATMENT	GOLD AND COPPER ALL MATING ENDS ALL CONTACT GROUPINGS
CSPT	SHELL MATERIAL	ALUMINUM ALLOY
CSWM	SHELL SURFACE TREATMENT	CADMIUM
CTBC	SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
CXCG	INCLUDED CONTACT QUANTITY	3 ALL MATING ENDS SINGLE CONTACT GROUPING
CXCL	INCLUDED CONTACT TYPE	ROUND PIN 1ST MATING END ALL CONTACT GROUPINGS
CXCL	INCLUDED CONTACT TYPE	ROUND SOCKET 2ND MATING END ALL CONTACT GROUPINGS
PMLC	PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PMWT	PRECIOUS MATERIAL AND WEIGHT	0.015 GOLD GRAINS,TROY
PRMT	PRECIOUS MATERIAL	GOLD
TEST	TEST DATA DOCUMENT	81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
ZZZK	SPECIFICATION/STANDARD DATA	81349-MIL-C-26482 GOVERNMENT SPECIFICATION

Schedule B & Trade

End Use : 20005	Electric apparatus
Schedule B : 8548900100 (NAICS 335999)	Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
SITC : 77813	Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, etc; electric parts of mach or apps, nes

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC	G - Item contains gold.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	Q22rzx-
Quantity per pack	1
Repariability	Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	061680 - Elec wiring plugs etc
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	658 - Electrical appliances, small