Buy S-290 Surfacer Woodworkin part by Newman Machine Co Inc

Part Number: S-290

Alternate P/N: S290

Manufacturer: newman machine co inc

NSN: 3220-01-142-2427

NIIN: 011422427

Item Name : surfacer woodworkin

CAGE Code: 43686

FSC: 3220 Woodworking Machines

INC Code: 07237

Country: USA

NCB Code: 01

FSG: 32 Woodworking Machinery and Equipment

We've received your request for S-290 (described as Surfacer Woodworkin), manufactured by Newman Machine Co Inc with CAGE code 43686. This part is registered under NSN 3220-01-142-2427, classified in FSG 32 Woodworking Machinery and Equipment / FSC 3220 Woodworking Machines. Our verification process will confirm traceability through supporting identifiers including NIIN 01-142-2427, NCB code 01 (origin: USA), and INC 07237. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your S-290 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for S-290

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part S-290, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number S-290 with NSN 3220-01-142-2427, 3220011422427

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3220-01-142-2427 Item PartTypeName: SURFACER,WOODWORKING	3220	011422427	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
S-290	5	2	3

Characteristics Data of NSN 3220-01-142-2427, 3220011422427

MRC	Criteria	Characteristic
AAXX	MOUNTING TYPE	FLOOR
ACDC	CURRENT TYPE	AC
AGSM	MATERIAL ACCOMMODATED THICKNESS	0.125 INCHES MINIMUM AND 8.000 INCHES MAXIMUM
AJSS	FREQUENCY IN HERTZ	60.0 NOMINAL
APHA	OPERATING VOLTAGE IN VOLTS	230.0 NOMINAL
ASQQ	HORSEPOWER RATING	3.00
ATJK	POWER SOURCE	ELECTRIC MOTOR
AWHA	BED TYPE	SCREW
BBFY	POWER FEED ROLL QUANTITY	4
BBGD	MATERIAL WIDTH ACCOMMODATED	30.000 INCHES NOMINAL
BBGF	CUTTER HEAD QUANTITY	4
BBGG	CUTTER HEAD CYLINDER DIAMETER	5.000 INCHES NOMINAL
BBGH	CUTTER HEAD CUTTING CIRCLE DIAMETER	5.000 INCHES NOMINAL
BBGJ	CUTTER HEAD KNIFE QUANTITY	4
BBJK	CUTTER HEAD KNIFE OVERALL LENGTH	5.000 INCHES NOMINAL
FAAZ	PHASE	THREE

Schedule B & Trade

End Use : 21140	Wood, glass, plastic
Schedule B : 8465990130 (NAICS 333243)	Woodworking machine tools, nesoi
SITC : 72812	Machine tools for working wood, cork, bone, hard rubber, hard plastic, etc.(including machines for nailing, stapling, glueing, etc.), n.E.S.

Identification

ADPE	Represents items with no adp components
CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	X
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	133300 - Machinery/machines noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	72E - Engineer and material handling equipment, test/tool sets and equipment