We've received your request for 577R708H08 (described as Resolver Electrical), manufactured by Northrop Grumman Systems Corporation with CAGE code 97942. This part is registered under NSN 5990-00-824-0236, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5990 Synchros and Resolvers. Our verification process will confirm traceability through supporting identifiers including NIIN 00-824-0236, NCB code 00 (origin: USA), and INC 22966. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your 577R708H08 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-824-0236 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 008240236 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11RC40 | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABWV | SHAFT DIAMETER | 0.1243 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.9700 INCHES NOMINAL SINGLE SHAFT |
| AJSP | STATOR INPUT CURRENT RATING | 22.0 MILLIAMPERES MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 235.00 NOMINAL |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 1.000 ROTOR TO COMPENSATOR NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0620 INCHES NOMINAL |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 1400.00 NOMINAL |
| CTJK | SHAFT FLATTED PORTION THICKNESS | 0.1050 INCHES NOMINAL SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 15.0 NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 160.0 MILLIWATTS MAXIMUM |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 30.0 MAXIMUM |
| AJSW | ZRO RESISTANCE IN OHMS | 370.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 380.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 240.00 NOMINAL |
| AJTX | COMPENSATION METHOD | RESISTOR COMPENSATED |
| AJTY | ZCO RESISTANCE IN OHMS | 370.00 NOMINAL |
| AJVE | COMPENSATOR RESONANT FREQUENCY IN HERTZ | 600.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 1570.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,FLATTED SINGLE SHAFT |
| CSPK | PLUS J ZCO REACTANCE IN OHMS | 1400.00 NOMINAL |
| CWFM | SHAFT FLATTED PORTION LENGTH | 0.9100 INCHES NOMINAL SINGLE SHAFT |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.0320 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0620 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9800 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0450 INCHES MINIMUM |
| End Use : 21610 | Medicinal equipment |
|---|---|
| Schedule B : 9018903000 (NAICS 339112) | Anesthetic instruments and appliances and parts and accessories |
| SITC : 87229 | Instruments and appliances used in medical, surgical or veterinary sciences, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9eh-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 062120 - Generators/motors/parts noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 593 - Motors and parts, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
