Buy 17091 Gear Bevel part by Pratt And Whitney Canada Inc

Part Number: 17091

Manufacturer: pratt and whitney canada inc

NSN: 3020-00-479-2654

NIIN: 004792654

Item Name : gear bevel

CAGE Code: 00198

FSC: 3020 Gears Pulleys Sprockets and Transmission Chain

INC Code: 05463

Country: USA

NCB Code: 00

FSG: 30 Mechanical Power Transmission Equipment

We've received your request for 17091 (described as Gear Bevel), manufactured by Pratt And Whitney Canada Inc with CAGE code 00198. This part is registered under NSN 3020-00-479-2654, classified in FSG 30 Mechanical Power Transmission Equipment / FSC 3020 Gears Pulleys Sprockets and Transmission Chain. Our verification process will confirm traceability through supporting identifiers including NIIN 00-479-2654, NCB code 00 (origin: USA), and INC 05463. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 17091 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 17091

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part 17091, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 17091 with NSN 3020-00-479-2654, 3020004792654

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3020-00-479-2654 Item PartTypeName: GEAR,BEVEL	3020	004792654		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
17091	6	9	5

Characteristics Data of NSN 3020-00-479-2654, 3020004792654

MRC	Criteria	Characteristic
AAQL	BODY STYLE	PLAIN,SOLID
ABSA	SPLINE QUANTITY	6 BOTH ENDS
AGJS	PITCH DIAMETER	1.8000 INCHES NOMINAL
AJLA	TEETH QUANTITY	18
ANTP	BORE STYLE	STRAIGHT SPLINE BOTH ENDS
CQFM	HARDNESS RATING	30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
CWCD	NOMINAL OUTSIDE DIAMETER	1.9780 INCHES
CWFR	NOMINAL OVERALL LENGTH	2.2070 INCHES
CWMW	TEETH TYPE	ZEROL
CWNM	TOOTH DIRECTION	RIGHT
CWPP	PRESSURE ANGLE	20.0000 DEGREES
CWQD	PITCH ANGLE	27.0000 DEGREES
CWQL	NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	1.500 INCHES FIRST END
CWRM	FACE NOMINAL WIDTH	0.5625 INCHES
CWRS	BORE NOMINAL DIAMETER	0.700 INCHES BOTH ENDS
CWTB	COUNTERBORE NOMINAL DEPTH	1.269 INCHES SECOND END
CWTG	COUNTERBORE NOMINAL DIAMETER	0.9063 INCHES SECOND END
CWTR	HUB STYLE DESIGNATOR	THREADED FIRST END
MATT	MATERIAL	STEEL COMP E9310 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYL	STYLE DESIGNATOR	PERIPHERAL FACE,BACK HUB PROTRUDING

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8483409000 (NAICS 333612)	Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately
SITC : 74840	Gears and gearing; ball screws; gear boxes and other speed changers (including torque converters)

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL:	R - 65.0
LTL:	R - 65.0
NMFC:	197339 - Wheels cog/gear/pinion i/s
SHC:	Z - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	593 - Motors and parts, (machinery and parts),(less than 35 feet)