Buy GDI-2096 Relay Electromagnet part by Precision Switching Inc

Part Number:  GDI-2096
Alternate P/N:  GDI2096
Manufacturer:  precision switching inc
NIIN:  010247882
Item Name :  relay electromagnet
CAGE Code:  52401
INC Code:  32512
Country:  USA
NCB Code:  01

We've received your request for GDI-2096 (described as Relay Electromagnet), manufactured by Precision Switching Inc with CAGE code 52401. This part is registered under NSN 5945-01-024-7882, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-024-7882, NCB code 01 (origin: USA), and INC 32512. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your GDI-2096 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GDI-2096

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part GDI-2096, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number GDI-2096 with NSN 5945-01-024-7882, 5945010247882

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5945-01-024-7882

Item PartTypeName:

RELAY,ELECTROMAGNETIC

59450102478820N
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
138C524H01595

Characteristics Data of NSN 5945-01-024-7882, 5945010247882

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH6.375 INCHES MAXIMUM
ABKQCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.000 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABKRCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH5.125 INCHES NOMINAL SINGLE MOUNTING FACILITY
ABKWOVERALL HEIGHT3.687 INCHES MAXIMUM
ABMKOVERALL WIDTH5.907 INCHES MAXIMUM
AEBVUNTHREADED MOUNTING HOLE DIAMETER0.220 INCHES NOMINAL SINGLE MOUNTING FACILITY
AFJNFRAGILITY FACTORMODERATELY RUGGED
AJSSFREQUENCY IN HERTZ60.0 NOMINAL
AKDXWINDING QUANTITY2
AKSLPURPOSE FOR WHICH DESIGNEDGENERAL
APCNCOIL QUANTITY2
APNPDUTY TYPEINTERMITTENT
AXHRMOUNTING FACILITY TYPE AND QUANTITY6 UNTHREADED HOLE SINGLE MOUNTING FACILITY
BBRGSTORAGE TYPEGENERAL PURPOSE WAREHOUSE
CBBLFEATURES PROVIDEDLATCHING CONTACTS
CBMECUBIC MEASURE138.842 CUBIC INCHES
CQYJMOUNTING FACILITY PATTERNRECTANGULAR SINGLE MOUNTING FACILITY
CRNGNONPILE-UP MAIN CONTACT ARRANGEMENT6 POLE,SINGLE THROW,NORMALLY OPEN,DOUBLE MAKE,MOMENTARY ACTION
CRPQNOMINAL OPERATING CURRENT RATING AND TYPE0.2 MILLIAMPERES AC ALL WINDINGS
CSXFOPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP115.0 VOLTS AC 25 DEG CELSIUS ALL WINDINGS
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE100.0 AMPERES AC RESISTIVE LOAD
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE75.0 AMPERES AC INDUCTIVE LOAD
CTDLMAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE75.0 AMPERES AC MOTOR LOAD
SPCLSPECIAL TEST FEATURESOPERATING TEMP RANGE M55 DEG C TO P85 DEG C
TTQYTERMINAL TYPE AND QUANTITY13 THREADED STUD ALL FUNCTIONS

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL 15b2--1
Quantity per pack 1
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LCL: P - 77.5
LTL: P - 77.5
NMFC: 061300 - Circuit breaker/switch noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top