We've received your request for GKG4802ST (described as Generator Engine Ac), manufactured by Prestolite Electric Inc with CAGE code 68505. This part is registered under NSN 2920-00-302-6499, classified in FSG 29 Engine Accessories / FSC 2920 Engine Electrical System Components Nonaircraft. Our verification process will confirm traceability through supporting identifiers including NIIN 00-302-6499, NCB code 00 (origin: USA), and INC 17311. Please submit your formal quotation request to proceed.
Thank you for choosing Aerospace Exchange for your GKG4802ST requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.
How to Begin the Quotation Process
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-302-6499 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 003026499 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1117478 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.680 INCHES NOMINAL |
| AAUH | SPLINE MINOR DIAMETER | 0.7225 INCHES MINIMUM AND 0.7335 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.8586 INCHES MINIMUM AND 0.8636 INCHES MAXIMUM |
| AAUK | SPLINE WIDTH | 0.097 INCHES MINIMUM AND 0.0982 INCHES MAXIMUM |
| ABFF | FURNISHED ITEMS | RADIO INTERFERENCE SHIELDING |
| ABSA | SPLINE QUANTITY | 13 |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES,TOP HOLE THREADED |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| AXFH | SPLINE LENGTH | 1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1875 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1490 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | SPLINED SHAFT END,THREADED |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.430 INCHES MINIMUM AND 4.450 INCHES MAXIMUM |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.430 INCHES MINIMUM AND 4.450 INCHES MAXIMUM |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 160.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.521 INCHES MINIMUM AND 7.538 INCHES MAXIMUM |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.381 INCHES MINIMUM AND 8.598 INCHES MAXIMUM |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.525 INCHES MINIMUM AND 0.537 INCHES MAXIMUM |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 4000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | B CLASS AND 2 GRADE AND B GROUP |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| End Use : 30200 | Engines and engine parts (carburetors, pistons, rings, and valves) |
|---|---|
| Schedule B : 8511500000 (NAICS 336320) | Generators for internal combustion engines, nesoi |
| SITC : 77831 | Electrical ignition or starting equipment used for spark-ignition or compression-ignition internal combustion engines; generators and cut-outs, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | ------- |
| Quantity per pack | 1 |
| Repariability | If condemned or uneconomically repairable , then dispose at direct support (ds) level. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | R - 65.0 |
| NMFC: | 062120 - Generators/motors/parts noi sub4 |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 590 - Generators and parts, (machinery and parts),(less than 35 feet) |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!
Request for Quote
