Buy 61181 Filter Band Pass part by R S Microwave Co Inc

Part Number:  61181
Manufacturer:  r s microwave co inc
NIIN:  010641463
Item Name :  filter band pass
CAGE Code:  61453
INC Code:  00209
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 61181 (described as Filter Band Pass), manufactured by R S Microwave Co Inc with CAGE code 61453. This part is registered under NSN 5915-01-064-1463, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5915 Filters and Networks. Our verification process will confirm traceability through supporting identifiers including NIIN 01-064-1463, NCB code 01 (origin: USA), and INC 00209. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 61181 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 61181

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 61181, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 61181 with NSN 5915-01-064-1463, 5915010641463

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5915-01-064-1463

Item PartTypeName:

FILTER,BAND PASS

59150106414630P
CIICHCCESDPMICCriticalityENAC
U U
Part NumberISCRNVCRNCCHCCMSDSSADC
41-052756-01521

Characteristics Data of NSN 5915-01-064-1463, 5915010641463

MRCCriteriaCharacteristic
ABKWOVERALL HEIGHT0.575 INCHES NOMINAL
ADAQBODY LENGTH2.750 INCHES NOMINAL
ADATBODY WIDTH0.688 INCHES NOMINAL
ADAUBODY HEIGHT0.375 INCHES NOMINAL
AEBYDISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH2.562 INCHES NOMINAL
AEHADISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.500 INCHES NOMINAL
AFGAOPERATING TEMP RANGE-54.0 TO 85.0 DEG CELSIUS
AHAJREFERENCE FREQUENCY PER FUNCTION160.0 MEGAHERTZ BLANK
AHAUINPUT IMPEDANCE PER FUNCTION W/LOAD50.0 OHMS BLANK
AHAVOUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT50.0 OHMS BLANK
AHBZVOLTAGE STANDING WAVE RATIO PER FUNCTION1.5 BLANK
AKEJMOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
AKNAINCLOSURE TYPEHERMETICALLY SEALED
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 THREADED HOLE
CQDRINSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS9.0 BLANK
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 PIN INPUT 1ST FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY1 PIN OUTPUT 2ND FUNCTION
CQDWFUNCTIONAL TERMINAL TYPE AND QUANTITY2 PIN GROUND 3RD FUNCTION
CQFCSPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION130.00 MEGAHERTZ BLANK AND 157.50 MEGAHERTZ BLANK AND 162.50 MEGAHERTZ BLANK AND 190.00 MEGAHERTZ BLANK
CQJXNOMINAL THREAD SIZE0.086 INCHES
CQRGBODY MATERIALMETAL
CRBBFREQUENCY BAND WIDTH PER FUNCTION157.50 MEGAHERTZ BLANK AND 162.50 MEGAHERTZ BLANK
CRBCDISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS70.0 MINIMUM BLANK AND 3.0 MAXIMUM BLANK 1ST FUNCTION
CRBNVOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION157.5 MEGAHERTZ BLANK AND 162.5 MEGAHERTZ BLANK
FEATSPECIAL FEATURESUNPACKAGED UNIT WEIGHT: OZ2.000
STYLSTYLE DESIGNATORRECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE

Schedule B & Trade

End Use : 41210 Stereo equipment, etc.
Schedule B : 8527995030 (NAICS 334310) Reception apparatus, nesoi
SITC : 76289 Radiobroadcast receivers, not combined with sound recording or reproducing apparatus nor with a clock, etc., n.E.S.

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC U - Precious metal content is unknown

NSN Management Codes

AAC Z
Classification Control U
MGMT_CTL Sf9eh-n
Quantity per pack 1
Repariability
Shelf Life N/A
SOS Sms
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: P - 77.5
NMFC: 061990 - Electrical equip: filters
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 593 - Motors and parts, (machinery and parts),(less than 35 feet)

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top