Buy CDTT44955 Cam Follower Needle part by Rbc Aircraft Products Inc

Part Number: CDTT44955

Manufacturer: rbc aircraft products inc

NSN: 3110-01-044-0833

NIIN: 010440833

Item Name : cam follower needle

CAGE Code: 3NPS1

FSC: 3110 Bearings Antifriction Unmounted

INC Code: 00040

Country: USA

NCB Code: 01

FSG: 31 Bearings

We've received your request for CDTT44955 (described as Cam Follower Needle), manufactured by Rbc Aircraft Products Inc with CAGE code 3NPS1. This part is registered under NSN 3110-01-044-0833, classified in FSG 31 Bearings / FSC 3110 Bearings Antifriction Unmounted. Our verification process will confirm traceability through supporting identifiers including NIIN 01-044-0833, NCB code 01 (origin: USA), and INC 00040. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your CDTT44955 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CDTT44955

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part CDTT44955, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number CDTT44955 with NSN 3110-01-044-0833, 3110010440833

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-044-0833 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING	3110	010440833	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CDTT44955	5	2	3

Characteristics Data of NSN 3110-01-044-0833, 3110010440833

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.3590 INCHES NOMINAL
ABHP	OVERALL LENGTH	2.1360 INCHES MINIMUM AND 2.1880 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.8745 INCHES MINIMUM AND 0.8760 INCHES MAXIMUM
AGRJ	STUD DIAMETER	0.3750 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.4640 INCHES MINIMUM AND 0.4690 INCHES MAXIMUM
AGXF	STUD LENGTH	1.6560 INCHES MINIMUM AND 1.7030 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
CMLP	THREAD QUANTITY PER INCH	24
CQJX	NOMINAL THREAD SIZE	0.375 INCHES
FEAT	SPECIAL FEATURES	NAS516-1 GREASE FITTING ROLLER END,DRILLED HOLE IN STUD 0.106 IN. MIN 0.116 IN. MAX DIA LOCATED 0.140 IN. FROM STUD END
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER OR PLASTIC POLYAMIDE SEAL
MATT	MATERIAL	STEEL COMP 1117 END PLATE
MATT	MATERIAL	STEEL COMP E52100 OR STEEL COMP 1117 STUD
MATT	MATERIAL	STEEL COMP E52100 OR STEEL COMP E50100 ROLLER
MATT	MATERIAL	STEEL COMP E52100 OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6440 ASSN STD 1ST MATERIAL RESPONSE AND ASTM A304 ASSN STD 2ND MATERIAL RESPONSE STUD
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6440 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6442 ASSN STD 2ND MATERIAL RESPONSE ROLLER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6440 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE END PLATE
SFTT	SURFACE TREATMENT	CADMIUM EXPOSED SURFACES AS MOUNTED
SFTT	SURFACE TREATMENT	CHROMIUM OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES AS MOUNTED
STYL	STYLE DESIGNATOR	CAM FOLLOWER
THSD	THREAD SERIES DESIGNATOR	UNF

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482400000 (NAICS 332991)	Needle roller bearings
SITC : 74640	Needle roller bearings

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	U - Precious metal content is unknown

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	9b-----
Quantity per pack	1
Repariability
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	P - 77.5
NMFC:	114820 - Bearings/bushings noi ball/roller
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	742 - Bearings