Buy 351 8489 050 Microcircuit Memory part by Rockwell Collins Aerospace

Part Number:  351 8489 050
Manufacturer:  rockwell collins aerospace
NIIN:  011308656
Item Name :  microcircuit memory
CAGE Code:  13499
INC Code:  41015
Country:  USA
NCB Code:  01
FSG:  59 Electrical and Electronic Equipment Components

We've received your request for 351 8489 050 (described as Microcircuit Memory), manufactured by Rockwell Collins Aerospace with CAGE code 13499. This part is registered under NSN 5962-01-130-8656, classified in FSG 59 Electrical and Electronic Equipment Components / FSC 5962 Microcircuits Electronic. Our verification process will confirm traceability through supporting identifiers including NIIN 01-130-8656, NCB code 01 (origin: USA), and INC 41015. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your 351 8489 050 requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 351 8489 050

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Begin the Quotation Process

  1. Fill out and submit the form for part 351 8489 050, on this page with details like your required quality and target pricing included.
  2. Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
  3. Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number 351 8489 050 with NSN 5962-01-130-8656, 5962011308656

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5962-01-130-8656

Item Description:

Microcircuit Memory

59620113086560NB
CIICHCCESDPMICCriticalityENAC
U A0
Part NumberISCRNVCRNCCHCCMSDSSADC
351 8489 050323

Characteristics Data of NSN 5962-01-130-8656, 5962011308656

MRCCriteriaCharacteristic
AEHXMAXIMUM POWER DISSIPATION RATING1.0 WATTS
AGAVEND ITEM IDENTIFICATIONDATA LINK 76301
ADATBODY WIDTH0.370 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
CZEQTIME RATING PER CHACTERISTIC650.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT
CQSZINCLOSURE CONFIGURATIONDUAL-IN-LINE
TTQYTERMINAL TYPE AND QUANTITY22 PRINTED CIRCUIT
CWSGTERMINAL SURFACE TREATMENTSOLDER
ADAQBODY LENGTH1.060 INCHES MINIMUM AND 1.120 INCHES MAXIMUM
AFGAOPERATING TEMP RANGE-55.0/+125.0 DEG CELSIUS
CBBLFEATURES PROVIDEDHERMETICALLY SEALED AND ELECTROSTATIC SENSITIVE AND W/ENABLE
CZENVOLTAGE RATING AND TYPE PER CHARACTERISTIC0.3 VOLTS MINIMUM POWER SOURCE AND 7.3 VOLTS MAXIMUM POWER SOURCE
TESTTEST DATA DOCUMENT13499-351-8489 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA
CZERMEMORY DEVICE TYPERAM
CRHL(NON-CORE DATA) BIT QUANTITY1024
CQWXOUTPUT LOGIC FORMCOMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC
ADAUBODY HEIGHT0.185 INCHES MAXIMUM
CQZPINPUT CIRCUIT PATTERN16 INPUT
CSWJ(NON-CORE DATA) WORD QUANTITY256
CQSJINCLOSURE MATERIALCERAMIC
AFJQSTORAGE TEMP RANGE-65.0 TO 150.0 DEG CELSIUS

Schedule B & Trade

End Use : 21320 Semiconductors
Schedule B : 8542900000 (NAICS 334413) Electronic integrated circuits and microassembly parts
SITC : 77689 Parts of electronic integrated circuits and microassembles

Identification

ADPE Represents items with no adp components
CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
ESD B - Represents items with esd sensitivity.
HMIC N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC V
Classification Control U
MGMT_CTL 9n-----
Quantity per pack No qup
Repariability
Shelf Life N/A
SOS S9e
Unit of Measure Ea

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 061700 - Elec appliances/instruments noi
SHC: 9 - Other or no special handling required (sh)
TCC: 3 - Electrostatic sensitive device (esd)
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Semiconductor’s Certifications and Memberships

Thank You for Your Visit.

Don’t forget That We offer 24/7 Service, Competitive Prices, and Fast Deliveries. We Hope You'll Make Us Your One-Stop Purchasing Solution!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top