Buy FBE 18C32MHA Bearing Sleeve part by Roller Bearing Company Of America

Part Number: FBE 18C32MHA

Manufacturer: roller bearing company of america

NSN: 3120-01-286-8030

NIIN: 012868030

Item Name : bearing sleeve

CAGE Code: 73134

INC Code: 13205

Country: USA

NCB Code: 01

We've received your request for FBE 18C32MHA (described as Bearing Sleeve), manufactured by Roller Bearing Company Of America with CAGE code 73134. This part is registered under NSN 3120-01-286-8030, classified in FSG / FSC . Our verification process will confirm traceability through supporting identifiers including NIIN 01-286-8030, NCB code 01 (origin: USA), and INC 13205. Please submit your formal quotation request to proceed.

Thank you for choosing Aerospace Exchange for your FBE 18C32MHA requirements. We specialize in authenticated aerospace components, offering both NSN-tracked military parts and commercial equivalents, all validated through our rigorous sourcing protocols.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for FBE 18C32MHA

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Begin the Quotation Process

Fill out and submit the form for part FBE 18C32MHA, on this page with details like your required quality and target pricing included.
Our staff will receive and review your information, quickly formulating fitting solutions based on your specifications.
Within 15 minutes or less, an account manager will contact you to present options and discuss how you can proceed with procurement.

NSN Information for Part Number FBE 18C32MHA with NSN 3120-01-286-8030, 3120012868030

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-286-8030 Item PartTypeName: BEARING,SLEEVE	3120	012868030	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
FBE 18C32MHA	5	1	5

Characteristics Data of NSN 3120-01-286-8030, 3120012868030

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	1.0915 INCHES NOMINAL
ADAR	BODY OUTSIDE DIAMETER	1.3424 INCHES MINIMUM AND 1.3427 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	1.1255 INCHES MINIMUM AND 1.1260 INCHES MAXIMUM
AEPR	FLANGE OUTSIDE DIAMETER	1.8550 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.0890 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE INSIDE LEFT CORNER
BZLX	CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER
CQFM	HARDNESS RATING	27.0 ROCKWELL C NOMINAL LEFT END SURFACE OF BODY AND FLANGE
CQFM	HARDNESS RATING	27.0 ROCKWELL C NOMINAL OUTSIDE DIAMETER SURFACE OF BODY
CQFM	HARDNESS RATING	27.0 ROCKWELL C NOMINAL OUTSIDE DIAMETER SURFACE OF FLANGE
CQFM	HARDNESS RATING	27.0 ROCKWELL C NOMINAL RIGHT END SURFACE OF BODY
CQFM	HARDNESS RATING	27.0 ROCKWELL C NOMINAL RIGHT END SURFACE OF LEFT FLANGE
FEAT	SPECIAL FEATURES	MAGNETIC PARTICLE INSPECTION PER HP6-5,CAGEC 02731
MATT	MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYAMIDE OR PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE
MATT	MATERIAL	STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF FLANGE
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF BODY
MATT	MATERIAL	STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-81820 MIL SPEC ALL MATERIAL RESPONSES INSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	PASSIVATE LEFT END SURFACE OF BODY AND FLANGE
SFTT	SURFACE TREATMENT	PASSIVATE OUTSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	PASSIVATE OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	PASSIVATE RIGHT END SURFACE OF BODY
SFTT	SURFACE TREATMENT	PASSIVATE RIGHT END SURFACE OF LEFT FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END
ZZZK	SPECIFICATION/STANDARD DATA	02731-HS5445 MANUFACTURERS STANDARD

Schedule B & Trade

End Use : 21180	Industrial machines, other
Schedule B : 8482997090 (NAICS 332991)	Parts, nesoi, for roller bearings or for combined ball/roller bearings, nesoi
SITC : 74699	Parts of ball and roller bearings, n.E.S.

Identification

CRITL	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC	N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
PMIC	A - Item does not contain precious metal.

NSN Management Codes

AAC	Z
Classification Control	U
MGMT_CTL	T22bjx-
Quantity per pack	1
Repariability	This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life	N/A
SOS	Sms
Unit of Measure	Ea

Freight Information

ACC:	V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
ADC:	A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL:	W - Rating variable
NMFC:	133300 - Machinery/machines noi
SHC:	9 - Other or no special handling required (sh)
TCC:	Z - No special type of cargo code applicable
WCC:	772 - Food sercive equipment, (mkt), field ranges, vacuum cans, beverage containers, etc